Wall
Single Gang Electrical Box, Up to 4 in Octagon Box
View:
Active Filters :
Sold Out
Sold Out
Sold Out
Sold Out
$
476.02
Qty:
Part #:BNH68W
- DUPLEX, 2-FUNCTION TYPE WHITE COLOR BATH AND VENTILATION FAN APPLICATION 120 VOLT, 15 AMP SWITCH 1 TYPE 120 VOLT, 15 AMP SWITCH 2 TYPE TYPE 2-FUNCTION
$
22.17
Qty:
Part #:KIDI4618A
- The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation
&bull Front battery pull tab allows battery activation without removing alarm from mounting bracket.
&bull Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
&bull Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
&bull Large centrally located Test/Hush® alarm control button.
&bull Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features
&bull Easy access front loading battery door.
&bull Battery backup provides protection in case of power failure.
&bull Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user&rsquos guide for complete instructions.
Technical Specifications
Model
i4618
UPC
0-47871-07581-2
Power Source
120VAC (80mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40°F (4.4°C) to 100°F (37.8°C)
Humidity Range
Up to 85% relative humidity (RH)
Size
5.6 in diameter x 1.8 in depth
Weight
.5lbs
Interconnects
Up to 24 Kidde devices
LED
Green, receiving ac power,Red, 4 modes of operation
Warranty
5 year limited
$
12.77
Qty:
Part #:I12040
- SMOKE ALARM WITH STROBE LIGHT TYPE AC/DC IONIZATION OPERATION TYPE UL APPROVAL 85 DB AT 10 FT HORN TYPE 120 VAC 60 HZ WITH 9 V BATTERY BACKUP VOLTAGE RATING/SOURCE LED INDICATING CONDITION LED/STROBE TYPE 24 INTERCONNECTION(S) SIZE 6.5 INCH W X 13.25 INCH D X 6 INCH H
$
23.04
Qty:
Part #:LEVIP710-DLZ
- WALL DIMMER TYPE 2.12 INCH W X 1.41 INCH D X 4.15 INCH H SIZE WHITE, IVORY, LIGHT ALMOND FINISH MULTI LOCATION, SINGLE POLE, THREE WAY OPERATION TYPE UL, CSA APPROVAL COMMERCIAL APPLICATION 120/277 VAC AT 60 HZ VOLTAGE RATING 1200 VA LOAD RATING SLIDE, ELECTRO MECHANICAL PRESET ON/OFF SWITCH OPERATOR TYPE DECORA, MULTI GANG WALL PLATE TYPE FLUORESCENT LOAD TYPE ILLUMATECH[T], DECORA[R] BRAND WITH LED LOCATOR OPERATING TEMPERATURE 0 TO 55 DEG C
$
56.73
Qty:
Part #:HAM1414PHE
- STEEL MATERIAL PHOSPHATIZED POWDER COATED FINISH ANSI 61 GRAY COLOR 6 INCH 6 INCH 4 INCH UL 508, UL, CSA, CE, JIC EGP-1 APPROVAL BRACKET MOUNTING NEMA 12/13, IP54 ENCLOSURE CONTINUOUS HINGE, CLAMP, GASKETED, SCREW COVER TYPE 16/14 GAUGE BODY, 14 GAUGE COVER MATERIAL SPECIFICATION 14R0505 BACK PANEL ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION ELECTRIC CONTROL HOUSING, HYDRAULIC CONTROL HOUSING, INSTRUMENT ENCLOSURE, JUNCTION BOX, PNEUMATIC CONTROL HOUSING, TERMINAL WIRING ENCLOSURE ENVIRONMENTAL CONDITIONS FALLING DIRT, DUST, OIL, WAT 1414 PH MODEL
$
89.18
Qty:
Part #:HAM1414PHH4
- STEEL MATERIAL PHOSPHATIZED POWDER COATED FINISH ANSI 61 GRAY COLOR 8 INCH 8 INCH 4 INCH UL 508, UL, CSA, CE, JIC EGP-1 APPROVAL BRACKET MOUNTING NEMA 12/13, IP54 ENCLOSURE CONTINUOUS HINGE, CLAMP, GASKETED, SCREW COVER TYPE 16/14 GAUGE BODY, 14 GAUGE COVER MATERIAL SPECIFICATION 14R0707 BACK PANEL ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION ELECTRIC CONTROL HOUSING, HYDRAULIC CONTROL HOUSING, INSTRUMENT ENCLOSURE, JUNCTION BOX, PNEUMATIC CONTROL HOUSING, TERMINAL WIRING ENCLOSURE ENVIRONMENTAL CONDITIONS FALLING DIRT, DUST, OIL, WAT 1414 PH MODEL
$
109.12
Qty:
Part #:HAMCS664
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 6 INCH 6 INCH 4 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
13.24
Qty:
Part #:HAMCS884
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 8 INCH 8 INCH 4 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
18.72
Qty:
Part #:HAMCS886
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 8 INCH 8 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
23.27
Qty:
Part #:HAMCSKO664
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 6 INCH 6 INCH 4 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 16/14 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE (2) (1/2 INCH-3/4 INCH), (1) (3/4 INCH-1 INCH) CONCENTRIC KNOCKOUT TOP/BOTTOM/SIDES KNOCKOUT SIZE 12 KNOCKOUT(S) (3) TOP, (3) BOTTOM, (6) SIDES KNOCKOUT LOCATION ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CSKO MODEL
$
13.24
Qty:
Part #:HAMC3R664HCR
- NEMA 3R ENCLOSURE USED ON HINGE INSTALLATION NEMA 3R ENCLOSURE HAMMOND MANUFACTURING[T] BRAND
$
54.64
Qty:
Part #:WATTCI-355
- SENSOR WITH RELAY TYPE 4.5 INCH DIA X 1.45 INCH D SIZE WHITE FINISH CUL APPROVAL CLASSROOM, COMPUTER ROOM, CONFERENCE ROOM, OPEN OFFICE, STORAGE ROOM APPLICATION 120/230/277/347 VAC AT 50/60 HZ VOLTAGE RATING CEILING MOUNTING NEUTRAL WIRE TERMINAL TYPE 0 TO 800 W AT 120 VAC (BALLAST/TUNGSTEN/LED), 0 TO 1200 W AT 230/277 VAC (BALLAST/LED), 0 TO 1500 W AT 347 VAC (BALLAST/LED) LOAD RATING 360 DEG FIELD OF VIEW PASSIVE INFRARED SENSOR TYPE 1200 SQ FT AREA COVERAGE BALLAST/TUNGSTEN/LED, LINE VOLTAGE LOAD TYPE 5/10/15/20/30 MIN (FIXED) TIME DELAY SENSITIVITY ADJUSTMENT PIR (HIGH/LOW) LIGHT INTENSITY 10 TO 300 FOOTCANDLES MOUNTING OPTIONS 4 INCH SQUARE JUNCTION BOX WITH DOUBLE GANG MUD RING, 4 INCH OCTAGONAL J-BOX
$
127.88
Qty:
Part #:PASLSDC16WV
- THREE SPEED, DUAL FAN SPEED, DE-HUMMER TYPE 1.74 INCH W X 1.28 INCH D X 4.185 INCH H SIZE WHITE COLOR SINGLE POLE OPERATION TYPE UL (CANADA AND US), UL, CSA APPROVAL RESIDENTIAL AND LIGHT COMMERCIAL APPLICATION 300 W 1.6 AMPERE LOAD RATING DECORATOR SLIDE, NON-PRESET OPERATOR TYPE TRADEMASTER[R] BRAND APPLICABLE STANDARD NEMA WD-1/WD-6 LS MODEL
$
33.20
Qty:
Part #:HAMCS10106
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
29.97
Qty:
Part #:HAMCS12126
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 12 INCH 12 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
38.49
Qty:
Displaying: 1 - 24 of 31 Matching Items