Electrical Enclosures
Blued-Steel, Tuff-Grip Pro
View:
Active Filters :
- Sub Brand: Blued-Steel, Tuff-Grip Pro Electrical Enclosures Firex
Part #:IDE31-056
- 120 FOOT TAPE LENGTH 1600 POUND TENSILE STRENGTH FULL-PERIMETER HANDLE CASE TYPE CARBON STEEL TAPE MATERIAL 1/8 INCH WIDTH X 0.06 INCH THICKNESS TAPE SIZE 12 INCH REEL DIAMETER BLUED-STEEL[TM], TUFF-GRIP[TM] PRO BRAND TAPE END TYPE FORMED HOOK CONSTRUCTIONAL FEATURE RUST AND CORROSION RESISTANT
$
50.36
Qty:
Part #:KIDHD135F
-
The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke.
The Kidde HD135F 120VAC wire in heat alarm gives you and your family an early warning to dangerous temperatures of 135F or more
This unit also includes a tamper resist pin that helps to deter thief and tampering.
This unit can be used as a single station unit or it can be interconnected to up to 24 Kidde devices in a multiple station arrangement
The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke. The alarm will sound if temperatures rise above 135F. The Kidde HD135F is interconnectable. The interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiating devices (Smoke, heat, CO, etc) interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. This unit includes a 5-year limited warranty and is UL Listed.
Interconnectable &ndash Interconnects with up to 24 Kidde devices of which 18 can be initiating.
Test Button &ndash Tests unit&rsquos electronic circuitry, horn and battery function.
9V Battery Back Up &ndash Provides continuous protection even during power outages.
Red LED &ndash Flashes every 30-40 seconds to indicate proper operation.
Low Battery Indicator &ndash Alerts user in the event of alow or missing battery.
Quick Connect Power Harness &ndash Makes installation fast and easy.
Technical Specifications
Model
HD135F
UPC Number
0-25417-84135-0
Power Source
120VAC, 60HZ, 9V battery backup
Sensor
Heat
Audio Alarm
85dB at 10ft
Temperature Range
-20F to +100F (-29C and +38C)
Humidity Range
5%-95% relative humidity (RH)
Size
5&rdquo in diameter x 2&rdquo depth
Weight
.75lbs
Interconnects
Up to 24 Kidde devices of which 18 can be initiating devices.
LED
Green, AC power present, alarm mode flashing Red indicates originating unit
Warranty
5 year limited warranty
$
34.89
Qty:
Part #:KIDI4618A
- The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation
&bull Front battery pull tab allows battery activation without removing alarm from mounting bracket.
&bull Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
&bull Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
&bull Large centrally located Test/Hush® alarm control button.
&bull Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features
&bull Easy access front loading battery door.
&bull Battery backup provides protection in case of power failure.
&bull Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user&rsquos guide for complete instructions.
Technical Specifications
Model
i4618
UPC
0-47871-07581-2
Power Source
120VAC (80mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40°F (4.4°C) to 100°F (37.8°C)
Humidity Range
Up to 85% relative humidity (RH)
Size
5.6 in diameter x 1.8 in depth
Weight
.5lbs
Interconnects
Up to 24 Kidde devices
LED
Green, receiving ac power,Red, 4 modes of operation
Warranty
5 year limited
$
12.77
Qty:
Part #:I12040
- SMOKE ALARM WITH STROBE LIGHT TYPE AC/DC IONIZATION OPERATION TYPE UL APPROVAL 85 DB AT 10 FT HORN TYPE 120 VAC 60 HZ WITH 9 V BATTERY BACKUP VOLTAGE RATING/SOURCE LED INDICATING CONDITION LED/STROBE TYPE 24 INTERCONNECTION(S) SIZE 6.5 INCH W X 13.25 INCH D X 6 INCH H
$
23.04
Qty:
Part #:BLIN4436GGV-NK
- LAY-IN TYPE 16 GAUGE STEEL MATERIAL GALVANIZED FINISH 36 INCH 4 INCH 4 INCH UL 870, CSA C22.2 APPROVAL NEMA 1, IP20 ENCLOSURE SCREW COVER TYPE NO KNOCKOUT(S) APPLICABLE STANDARD IEC 529 APPLICATION HOUSES RUNS OF CONTROL AND POWER CABLE, USED FOR CABLE AND WIRE JUNCTION, DISTRIBUTION AND TERMINATION
$
20.81
Qty:
Part #:BLIN6660GGV-NK
- LAY-IN TYPE 16 GAUGE STEEL MATERIAL GALVANIZED FINISH 60 INCH 6 INCH 6 INCH UL 870, CSA C22.2 APPROVAL NEMA 1, IP20 ENCLOSURE SCREW COVER TYPE NO KNOCKOUT(S) APPLICABLE STANDARD IEC 529 APPLICATION HOUSES RUNS OF CONTROL AND POWER CABLE, USED FOR CABLE AND WIRE JUNCTION, DISTRIBUTION AND TERMINATION
$
44.32
Qty:
Part #:BLIN8860GGV-NK
- LAY-IN TYPE 14 GAUGE STEEL MATERIAL GALVANIZED FINISH 60 INCH 8 INCH 8 INCH UL 870, CSA C22.2 APPROVAL NEMA 1, IP20 ENCLOSURE SCREW COVER TYPE NO KNOCKOUT(S) APPLICABLE STANDARD IEC 529 APPLICATION HOUSES RUNS OF CONTROL AND POWER CABLE, USED FOR CABLE AND WIRE JUNCTION, DISTRIBUTION AND TERMINATION
$
88.69
Qty:
Part #:BLIN4460GNK
- LAY-IN TYPE 16 GAUGE STEEL MATERIAL ANSI 61 GRAY ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH 60 INCH 4 INCH 4 INCH UL 870, CSA C22.2 APPROVAL NEMA 1, IP20 ENCLOSURE SCREW COVER TYPE NO KNOCKOUT(S) APPLICABLE STANDARD IEC 529 APPLICATION HOUSES RUNS OF CONTROL AND POWER CABLE, USED FOR CABLE AND WIRE JUNCTION, DISTRIBUTION AND TERMINATION
$
33.28
Qty:
Part #:BLIN4448GRT-NK
- 16 GAUGE STEEL MATERIAL ANSI 61 GRAY ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH 48 INCH 4 INCH 4 INCH UL 870, CSA C22.2, IEC 529 APPROVAL NEMA 3R, IP24 ENCLOSURE SCREW COVER TYPE WIRING TROUGH NO KNOCKOUT(S) APPLICATION POWER CABLE AND WIRE JUNCTION, DISTRIBUTION AND TERMINATION
$
71.03
Qty:
Part #:BLINAW1212P
- SOLID TYPE 14 GAUGE STEEL MATERIAL PAINTED FINISH WHITE COLOR 10.87 INCH 10.87 INCH JIC ENCLOSURE ENCLOSURE TYPE AW MODEL
$
12.56
Qty:
Part #:BLINAW2424P
- SOLID TYPE 12 GAUGE STEEL MATERIAL POWDER PAINTED FINISH WHITE COLOR 20.87 INCH 20.87 INCH 0.75 INCH THICKNESS CONSOLE, NEMA 4/4X/12 ENCLOSURE ENCLOSURE TYPE AW MODEL
$
68.57
Qty:
Part #:IDE31-033
- 50 FOOT TAPE LENGTH 1600 POUND TENSILE STRENGTH FULL-PERIMETER HANDLE CASE TYPE CARBON STEEL TAPE MATERIAL 1/8 INCH WIDTH X 0.06 INCH THICKNESS TAPE SIZE 9 INCH REEL DIAMETER BLUED-STEEL[TM], TUFF-GRIP[TM] PRO BRAND TAPE END TYPE FORMED HOOK CONSTRUCTIONAL FEATURE RUST AND CORROSION RESISTANT
$
35.70
Qty:
Part #:IDE31-057
- 240 FOOT TAPE LENGTH 1600 POUND TENSILE STRENGTH CARBON STEEL TAPE MATERIAL 1/8 INCH WIDTH X 0.06 INCH THICKNESS TAPE SIZE 12 INCH REEL DIAMETER IDEAL BRAND END TYPE FORMED HOOK
$
83.76
Qty:
Part #:12128SCWKOGALVN1
- STEEL MATERIAL ACRYLIC ELECTROCOATED OVER GALVANIZED SURFACE FINISH ANSI 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 12 INCH 12 HEIGHT IN INCH 8 INCH 304.8 HEIGHT IN MM UL 50, CSA 22.2 APPROVAL WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON COVER TYPE 16 GAUGE MATERIAL SPECIFICATION (2) (1/2 INCH - 3/4 INCH) CONDUIT CONCENTRIC KNOCKOUT TOP, (2) (3/4 INCH - 1 INCH) CONDUIT CONCENTRIC KNOCKOUT TOP, (1) (1 INCH - 1 1/4 INCH) CONDUIT CONCENTRIC KNOCKOUT TOP, (2) (1/2 INCH - 3/4 INCH) CONDUIT CONCENTRIC KNOCKOUT BOTTOM, (2) (3/4 INCH - 1 KNOCKOUT SIZE 20 KNOCKOUT(S) (5) TOP, (5) BOTTOM, (10) SIDES KNOCKOUT LOCATION B-LINE. BRAND APPLICABLE STANDARD IEC 529 PANEL NONE HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN
$
53.93
Qty:
Part #:10106SCNKOGALVN1
- UNFLANGED TYPE STEEL MATERIAL GALVANIZED, ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 6 INCH UL 50, CSA C22.2, IEC 529 APPROVAL WALL MOUNT MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON COVER TYPE 16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE APPLICATION WIRING BOXES, JUNCTION AND PULL BOXES
$
20.47
Qty:
Part #:10104SCNKOGRAYN1
- UNFLANGED TYPE STEEL MATERIAL ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 4 INCH UL 50, CSA C22.2, IEC 529 APPROVAL WALL MOUNT MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON COVER TYPE 16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE APPLICATION WIRING BOXES, JUNCTION AND PULL BOXES
$
21.75
Qty:
Displaying: 1 - 16 of 16 Matching Items