Eaton Crouse-Hinds Series
Brk


Displaying: 1 - 24 of 159 Matching Items
159 Items
View:
Active Filters :
Part #:BRKFG250B

SMOKE ALARM TYPE DUAL IONIZATION OPERATION TYPE UL 217 APPROVAL 85 DB AT 10 FT HORN TYPE 9 V BATTERY VOLTAGE RATING/SOURCE RED LED INDICATING DC POWER LED/STROBE TYPE BRK[R] BRAND SIZE 4.25 INCH DIA X 1.6 INCH H CARBON ZINC BATTERY FG250 MODEL
$ 8.18
Part #:BRK1038510

120V LED Strobe Light, ADA Compliant This AC hardwired signaling device is designed to meet the needs to the ADA where a 177 candela strobe light is required for deaf &amp hard of hearing residential and institutional applications. &raquo Smart Strobe &ndash Separate flash patterns to distinguish between smoke and carbon monoxide &raquo 177 Candela LED &ndash Powerful LED strobe light provides effective visual warning intended to waken hearing impaired residents &raquo Strobe Signal Synchronization &ndash when multiple units installed, strobes flash in unison &raquo 1Hz Flash Rate &ndash Meets ADA, ANSI 117.1, NFPA 72 and UL STD 1971 &raquo Slim design &raquo 10-Year End-of-Life Timer &raquo 10-Year Limited Warranty
$ 70.16
Part #:BRK9120B

120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money. &raquo Single button test/silence &raquo 9V Battery Backup &raquo Latching alarm indicator - remembers which unit initiated an alarm &raquo Smart Technology - helps reduce the number of nuisance alarms &raquo Perfect Mount - allows for easy alignment of alarm &raquo Dust Cover &raquo Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. &raquo 10-Year Limited Warranty
$ 10.73
Part #:BRKSC9120B

120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements. &raquo 10YR CO Sensor/10YR End of Life &raquo Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies &raquo 9V Alkaline Battery Backup &raquo Latching alarm indicator - remembers which unit initiated an alarm &raquo Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm &raquo End of Life Signal provides audible notification alarms needs to be replaced &raquo Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms &raquo Perfect Mount - allows for easy alignment of alarm &raquo Dust Cover &raquo Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. &raquo Single button test/silence &raquo 10-Year Limited Warranty
$ 44.25
Part #:CWDAH460C9W

NYLON PA6 MATERIAL 0.66 INCH MIN. CABLE OUTER DIAMETER 1.5 INCH MAX. CABLE OUTER DIAMETER 4 WIRE(S) UL 498, UL 1682, UL 1686, CSA C22.2 APPROVAL 250 VAC 3-PHASE VOLTAGE RATING 60 AMPERE CURRENT RATING 3 POLE(S) CORROSION RESISTANT, DUSTTIGHT, WATERTIGHT ARROW HART[R] BRAND APPLICABLE STANDARD IEC 60309-1/60309-2 FLAMMABILITY RATING UL 94- HB (HOUSING), UL 94-V0 (CONTACT CARRIERS) POWER RATING 7-1/2 HP THREADED ENTRY 1-1/2 INCH NPT AH MODEL
$ 399.60
Part #:CWDAH460P9W

STRAIGHT TYPE NYLON PA6 MATERIAL 0.66 INCH MIN. CABLE OUTER DIAMETER 1.5 INCH MAX. CABLE OUTER DIAMETER 4 WIRE(S) UL 1682, UL 1686, CUL, CSA C22.2 APPROVAL 250 VAC 3-PHASE VOLTAGE RATING 60 AMPERE CURRENT RATING 3 POLE(S) WATERTIGHT ARROW HART[R] BRAND APPLICABLE STANDARD IEC 60309-1/60309-2 FLAMMABILITY RATING UL 94- HB (HOUSING), UL 94-V0 (CONTACT CARRIERS) AH MODEL
$ 362.60
Part #:CWDAH460R7W

NYLON PA6 MATERIAL 4 WIRE(S) UL 1682, UL 1686, CSA C22.2 APPROVAL 480 VAC 3-PHASE VOLTAGE RATING 60 AMPERE CURRENT RATING 3 POLE(S) WATERTIGHT ARROW HART[R] BRAND APPLICABLE STANDARD IEC 60309-1/60309-2 FLAMMABILITY RATING UL 94- HB (HOUSING), UL 94-V0 (CONTACT CARRIERS) AH MODEL
$ 389.24
Part #:CUTTP432

WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (8) 3/4 INCH SIDE KNOCKOUT SIZE 12 KNOCKOUT(S) (4) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$ 8.09
Part #:CUTTP451

WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (6) 1/2 INCH SIDE, (3) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (4) BOTTOM, (9) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$ 3.75
Part #:CUTTP512

RAISED TYPE STEEL MATERIAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (1) TOGGLE SWITCH OPENING TYPE 1/2 INCH RAISED COOPER CROUSE-HINDS. BRAND
$ 1.84
Part #:CUTTP516

RAISED TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 5.5 CUBIC INCH CAPACITY 4 INCH DEPTH BOX SIZE (1) DUPLEX RECEPTACLE OPENING TYPE 1/2 INCH RAISED
$ 1.62
Part #:CUTTP508

RAISED TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (2) TOGGLE SWITCH OPENING TYPE 1/2 INCH RAISED
$ 2.06
Part #:CUTTP510

RAISED TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (2) DUPLEX RECEPTACLE OPENING TYPE 1/2 INCH RAISED
$ 1.96
Part #:CUTTP506

RAISED TYPE STEEL MATERIAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (1) DUPLEX RECEPTACLE, (1) TOGGLE SWITCH OPENING TYPE 1/2 INCH RAISED COOPER CROUSE-HINDS. BRAND
$ 2.18
Part #:CUTTP708

STEEL MATERIAL 500 SET STANDARD PACKAGE USED ON OLD WORK SWITCH BOX
$ 0.62
Part #:CUTTP302

STEEL MATERIAL 1-1/2 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER C BRACKET MOUNTING 50 STANDARD PACKAGE 15.5 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (2) 1/2 INCH SIDE KNOCKOUT SIZE 7 KNOCKOUT(S) (1) BOTTOM, (2) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$ 7.10
Part #:CUTTP424

SQUARE BOX EXTENSION RING TYPE STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL APPROVAL 50 STANDARD PACKAGE 21 CU INCH CAPACITY (12) 1/2 INCH CONDUIT SIDE KNOCKOUT SIZE 12 KNOCKOUT(S)
$ 2.46
Part #:CUTTP403

WELDED STEEL MATERIAL 4 INCH 4 WIDTH IN INCH 4 INCH 4 HEIGHT IN INCH 2-1/8 INCH 2.125 DEPTH IN INCH UL 514-A, UL 514-B, UL 514-C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH CONDUIT BOTTOM, (2) (1/2 INCH - 3/4 INCH) CONDUIT ECCENTRIC KNOCKOUT BOTTOM, (8) 1/2 INCH CONDUIT SIDES, (4) (1/2 INCH - 3/4 INCH) CONDUIT ECCENTRIC KNOCKOUT SIDES KNOCKOUT SIZE 16 KNOCKOUT(S) (4) BOTTOM, (12) SIDE KNOCKOUT LOCATION COOPER CROUSE-HINDS. BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION #W-J-800E, NEMA OS-1 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN
$ 2.43
Part #:CUTTP459

WELDED STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL 514A/514B/514C APPROVAL 1/8 INCH SETBACK VM BRACKET MOUNTING 25 STANDARD PACKAGE 21 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (2) 1/2 INCH SIDE, (1) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 8 KNOCKOUT(S) (1) BOTTOM, (3) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION ARMORED/METAL CLAD CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$ 6.24
Part #:CUTTP478

FLAT TYPE STEEL MATERIAL UL APPROVAL 50 STANDARD PACKAGE 4 INCH BOX SIZE 1/2 INCH KNOCKOUT OPENING TYPE APPLICABLE STANDARD NEC 370
$ 1.31
Part #:CUTTP521

WELDED STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 44 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (12) (1/2 INCH-3/4 INCH) CONCENTRIC SIDE KNOCKOUT SIZE 16 KNOCKOUT(S) (4) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$ 9.40
Part #:PLG034

THREADED TYPE STEEL MATERIAL ELECTROGALVANIZED CHROMATE TREATED FINISH THREADED CONDUIT HUB USED ON UL 1203, CSA C22.2 APPROVAL CLASS I DIV 1 AND 2 GROUP A B, CLASS II DIV 1 GROUP E F G, CLASS II DIV 2 GROUP F G, CLASS III ENCLOSURE 3/4 INCH TRADE SIZE RECESSED HEAD STYLE CONSTRUCTIONAL FEATURE EXPLOSIONPROOF, DUST IGNITIONPROOF APPLICATION HAZARDOUS LOCATION APPLICABLE STANDARD NEC/CEC PLG MODEL
$ 0.70
 
Displaying: 1 - 24 of 159 Matching Items