Topaz
Brk
closeout
$
9.95
Qty:
Part #:TOP457
- GRAY PLASTIC MATERIAL SNAP-IN INSTALLATION NON-METALLIC CABLE CABLE TYPE (2) 14 AWG OR (2) 12 AWG CABLE SIZE UL APPROVAL 1000 PER CASE STANDARD PACKAGE 1/2 INCH KNOCKOUT SIZE ROHS COMPLIANT SIZE 1 INCH DIA
$
0.29
Qty:
closeout
$
10.95
Qty:
$
1.45
Qty:
closeout
$
11.95
Qty:
$
1.19
Qty:
Qty:
Part #:BRKFG250B
- SMOKE ALARM TYPE DUAL IONIZATION OPERATION TYPE UL 217 APPROVAL 85 DB AT 10 FT HORN TYPE 9 V BATTERY VOLTAGE RATING/SOURCE RED LED INDICATING DC POWER LED/STROBE TYPE BRK[R] BRAND SIZE 4.25 INCH DIA X 1.6 INCH H CARBON ZINC BATTERY FG250 MODEL
$
8.18
Qty:
$
39.46
Qty:
$
57.92
Qty:
Part #:BRK1038510
- 120V LED Strobe Light, ADA Compliant This AC hardwired signaling device is designed to meet the needs to the ADA where a 177 candela strobe light is required for deaf & hard of hearing residential and institutional applications.
» Smart Strobe &ndash Separate flash patterns to distinguish between smoke and carbon monoxide » 177 Candela LED &ndash Powerful LED strobe light provides effective visual warning intended to waken hearing impaired residents » Strobe Signal Synchronization &ndash when multiple units installed, strobes flash in unison » 1Hz Flash Rate &ndash Meets ADA, ANSI 117.1, NFPA 72 and UL STD 1971 » Slim design » 10-Year End-of-Life Timer » 10-Year Limited Warranty
$
70.16
Qty:
Part #:BRK9120B
- 120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money.
» Single button test/silence » 9V Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Smart Technology - helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » 10-Year Limited Warranty
$
10.73
Qty:
Part #:BRKSC9120B
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
44.25
Qty:
Part #:TOPT124
- RIGHT HAND, THREADED TYPE TEMPORARY LIGHTING USED ON 60/600 V VOLTAGE RATING 6 INCH 14 AWG STRANDED LEAD TERMINAL TYPE ROHS COMPLIANT BASE TYPE MEDIUM MATERIAL RUBBER
$
7.29
Qty:
$
3.78
Qty:
$
2.30
Qty:
Part #:TPZ121
- STRAIGHT TYPE DIE-CAST ZINC MATERIAL 1.38 INCH SET SCREW INSTALLATION UL, CSA APPROVAL 250 PER CASE STANDARD PACKAGE 1/2 INCH TRADE SIZE 1/2 INCH KNOCKOUT SIZE 0.38 INCH CORD SIZE NON-INSULATED THROAT TYPE FLEX CONDUIT SINGLE CABLE OPENING
$
1.43
Qty:
Part #:CLB400
- DIE-CAST COPPER FREE ALUMINUM BODY, NEOPRENE RUBBER GASKET MATERIAL 15.5 INCH L X 5.5 INCH W X 6.922 INCH H SIZE RIGID CONDUIT USED ON 4 INCH HUB SIZE THREADED INSTALLATION LB CONFIGURATION 2 HUB(S) UL, CSA APPROVAL STAMPED STEEL COVER TYPE 90 DEGREE HUB LOCATION BACK ACCESS OPENING APPLICATION WET LOCATION CONDUCTOR SIZE (3) 500 MCM INCLUDES COVER AND GASKET
$
123.73
Qty:
$
8.87
Qty:
Part #:GALCP500
- STEEL MATERIAL GALVANIZED FINISH 3.75 INCH UL APPROVAL ANSI C80.1 APPLICABLE STANDARD 2 PER CASE STANDARD PACKAGE 5 INCH TRADE SIZE THREADED END TYPE ROHS COMPLIANT THREAD PER INCH 8
$
65.19
Qty:
$
19.71
Qty:
Part #:CTB012
- ZINC PLATED DIE-CAST ALUMINUM MATERIAL 5.35 INCH L X 2.02 INCH W X 1.31 INCH H SIZE EMT/RIGID CONDUIT USED ON 1/2 INCH HUB SIZE TB CONFIGURATION 3 HUB(S) UL, CSA APPROVAL TEE HUB LOCATION BACK ACCESS OPENING CONDUCTOR SIZE (1) 6 AWG INCLUDES COVER AND GASKET
$
6.91
Qty:
Displaying: 1 - 24 of 38 Matching Items