ERICO INC.
CRC Industries
View:
Active Filters :
- Mfr / Trade Name: CRC Industries ERICO INC.
Part #:CRC02094
- WATER WHITE COLOR -40 TO 400 DEG F TEMPERATURE RATING CAN CONTAINER TYPE 10 OUNCE CONTAINER SIZE SILICONE BASE 0 DEG F FLASH POINT AEROSOL, LIQUID PHYSICAL FORM ROHS COMPLIANT UNIT PACKAGE 16 OUNCE FILM TYPE DRY, CLEAR, NON-HARDENING ODOR MILD SOLVENT BOILING POINT 118.4 DEG F PROPELLANT TYPE HYDROCARBON DIELECTRIC STRENGTH 350 MILLIVOLT SPECIFIC GRAVITY 0.6694 EVAPORATION RATE FAST VAPOR PRESSURE 1577.3 HECTOPASCAL VAPOR DENSITY GREATER THAN 1 (AIR EQUAL TO 1) VOC CONTENT 649.9 GPL OVERALL DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 7.75 INCH HEIGHT APPLICABLE STANDARD NSF H1
$
12.91
Qty:
Part #:CRC14050
- AEROSOL CONTAINER TYPE TAPPING, THREADING, DRILLING, SAWING, SHEARING, TURNING, REAMING ITEM TYPE 300 DEG F TEMPERATURE RANGE 16 OUNCE CONTAINER SIZE PHYSICAL STATE LIQUID COLOR BROWN BASE TYPE PETROLEUM VOC CONTENT 184.8 GALLON PER LITER MELTING POINT -40 DEG F FLASH POINT 300 DEG F NET FILL 12 OUNCE UNIT DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 7.75 INCH HEIGHT APPLICABLE STANDARD NSF P1
$
12.57
Qty:
Part #:CRC14077
- POLYURETHANE TYPE TAN COLOR UL APPLICABLE STANDARD FILLING, INSULATING, SEALING, BONDING, HVAC, ELECTRICAL, INDUSTRIAL, PLUMBING, AROUND ELECTRICAL OUTLET, UTILITY PANEL, DUCT, PIPE, DOOR, WINDOW, BASE PLATE, JOINT, CRACK, CRAWLSPACE, FOUNDATION, SPOT INSULATING, TOUCH-UP APPLICATION -200 TO 200 DEG F TEMPERATURE RATING AEROSOL CAN CONTAINER TYPE 16 OUNCE CONTAINER CAPACITY 12 TO 24 HOUR (CURE TIME) SETTING TIME ROHS COMPLIANT OVERALL DIMENSION 2.19 INCH WIDTH X 2.19 INCH DEPTH X 8.06 INCH HEIGHT SPECIFIC GRAVITY 1.2 VOC CONTENT 35 GRAM PER LITER NET FILL 12 OUNCE
$
16.54
Qty:
Part #:CRC18414
- CORROSION TYPE GRAY COLOR THREAD, EXPOSED EDGE, FASTENER, CONDUIT, STRAPPING, WELD, FENCING, RAILING, GRATE, ELECTRICAL POLE, BREAKER PANEL HOUSING, RAIN SPOUT, SIGN, DOOR, TRAILER, WASTE CONTAINER, CATWALK, GUARD RAIL APPLICATION AEROSOL, BOTTLE CONTAINER TYPE 13 OUNCE CONTAINER SIZE 15 TO 30 MINUTE DRYING TIME BRIGHT ZINC-IT[R] BRAND OVERALL DIMENSION 5.62 INCH WIDTH X 11.31 INCH DEPTH X 8.68 INCH HEIGHT
$
16.58
Qty:
Part #:CAD812M24SM
- H-MSM CONDUIT SNAP CLOSE CLIP, 360 DEGREE PIVOT TYPE ARMOR SPRING STEEL MATERIAL HAMMER-ON INSTALLATION UL, CUL, UL (CANADA AND US) APPROVAL SIDE MOUNTING 100 STANDARD PACKAGE 1/2 TO 3/4 INCH EMT/RIGID CONDUIT SIZE 25 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE CADDY[R] BRAND OUTER DIAMETER 0.709 TO 1.181 INCH
$
2.44
Qty:
Part #:CAD812M24
- EM-M CONDUIT SNAP CLOSE CLIP, 360 DEGREE PIVOT TYPE ARMOR SPRING STEEL MATERIAL HAMMER-ON INSTALLATION SIDE MOUNTING 100 STANDARD PACKAGE 1/2 TO 3/4 INCH EMT/RIGID CONDUIT SIZE 75 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE CADDY[R] BRAND OUTER DIAMETER 0.71 TO 1.181 INCH
$
3.07
Qty:
Part #:CADKX
- CABLE/CONDUIT CLIP TYPE ARMOR SPRING STEEL MATERIAL UL, CUL, UL (CANADA AND US) APPROVAL 100 STANDARD PACKAGE (2) 14 AWG TO (3) 12 AWG (ARMORED/METALLIC CABLE) CONDUIT/CABLE SIZE CADDY[R] BRAND OUTER DIAMETER 0.472 INCH
$
0.90
Qty:
Part #:CADK12
- CABLE/CONDUIT CLIP TYPE CADDY ARMOUR SPRING STEEL MATERIAL UL (CANADA AND US) APPROVAL 100 PER PACK STANDARD PACKAGE 15 POUND (VERTICAL), 100 POUND (HORIZONTAL) LOAD CAPACITY 1/2 TO 3/4 INCH (RIGID/EMT), 1 INCH (EMT) CONDUIT/CABLE SIZE ERICO INTERNATIONAL CORPORATION BRAND OUTER DIAMETER 0.945 INCH
$
0.85
Qty:
Part #:CADCNB812M
- NAIL BRACKET TYPE 100 PER BOX STANDARD PACKAGE 1/2 INCH, 3/4 INCH CONDUIT CONDUIT/CABLE SIZE CADDY. BRAND CNB MODEL
$
2.19
Qty:
Part #:CADMP1S
- 1-GANG TYPE PRE-GALVANIZED STEEL MATERIAL 1/2 TO 5/8 INCH DRYWALL INSTALLATION UL (CANADA AND US) APPROVAL STUD, SCREW-ON, NAIL MOUNTING 25 STANDARD PACKAGE CADDY[R] BRAND OVERALL DIMENSION 4 INCH WIDTH X 4-1/2 INCH HEIGHT MOUNTING HOLE SIZE 0.156 INCH (HOLE 1), 0.187 INCH (HOLE 2)
$
2.52
Qty:
Part #:CADCAT32HP
- J-HOOK, WIDE BASE TYPE PRE-GALVANIZED STEEL MATERIAL UL (CANADA AND US) APPROVAL 50 PER PACK STANDARD PACKAGE 60 POUND LOAD CAPACITY 2 INCH DIAMETER FITTING SIZE ERICO INTERNATIONAL CORPORATION BRAND CABLE CAPACITY 90 (CAT 5E), 60 (CAT 6) AREA 3.97 SQUARE INCH APPLICABLE STANDARD DIN 4102-12, EN 50174-2, IEC 14763-2, TIA 568, TIA 569
$
4.60
Qty:
Part #:CAD4G16
- T-BAR TO ELECTRICAL FIXTURE TYPE CADDY ARMOUR SPRING STEEL MATERIAL ELECTRICAL FIXTURE USED ON TWIST-ON INSTALLATION UL APPROVAL 100 PER PACK STANDARD PACKAGE 50 POUND LOAD CAPACITY 9/16 INCH LENGTH X 1/4 INCH DIAMETER SCREW FASTENER TYPE 15/16 INCH T BAR SIZE ERICO INTERNATIONAL CORPORATION BRAND INCLUDES WING NUT
$
1.82
Qty:
Part #:CAD512
- T-BAR TO ELECTRICAL BOX TYPE PRE-GALVANIZED CADDY ARMOUR SPRING STEEL MATERIAL ELECTRICAL BOX/CONDUIT USED ON SNAP-ON INSTALLATION 50 PER PACK STANDARD PACKAGE 20 POUND LOAD CAPACITY 24 INCH SPAN BOX HANGER FASTENER TYPE ERICO INTERNATIONAL CORPORATION BRAND INCLUDES MOUNTING CLIP AND SCREW
$
14.96
Qty:
Part #:CAD65
- UL (CANADA AND US) APPLICABLE STANDARD WELDING MATERIAL CADWELD USED ON MODEL/BRAND MOLD USED ON ITEM XBCY1Y1 USED ON ITEM PART NO CADWELD[R] PLUS BRAND SIZE IDENTIFICATION RING COLOR DARK GREEN
$
9.74
Qty:
Part #:CADGRC182C
- STANDARD TYPE GR SERIES CABLE TO GROUND ROD CONNECTOR USED ON UL (CANADA AND US) APPROVAL 1/0 AWG STRANDED CONDUCTOR SIZE 3/4 INCH ROD SIZE 90 WELD METAL TYPE L160 HANDLE CLAMP TYPE COPPER CLAD ROD MATERIAL PLAIN/SECTIONAL/THREADED ROD TYPE CADWELD[R] BRAND CONDUCTOR OUTER DIAMETER 0.373 INCH GR MODEL
$
111.29
Qty:
Part #:CADGRC182Q
- STANDARD TYPE GR SERIES CABLE TO GROUND ROD CONNECTOR USED ON UL (CANADA AND US) APPROVAL 4/0 AWG STRANDED CONDUCTOR SIZE 3/4 INCH ROD SIZE 90 WELD METAL TYPE L160 HANDLE CLAMP TYPE COPPER CLAD ROD MATERIAL PLAIN/SECTIONAL/THREADED ROD TYPE CADWELD[R] BRAND CONDUCTOR OUTER DIAMETER 0.528 INCH GR MODEL
$
111.29
Qty:
Displaying: 1 - 18 of 18 Matching Items