ERICO INC.
CRC Industries
View:
Active Filters :
- Mfr / Trade Name: CRC Industries ERICO INC. SELECTA-PRODUCTS Tork
$
45.02
Qty:
$
29.49
Qty:
Part #:CRC02094
- WATER WHITE COLOR -40 TO 400 DEG F TEMPERATURE RATING CAN CONTAINER TYPE 10 OUNCE CONTAINER SIZE SILICONE BASE 0 DEG F FLASH POINT AEROSOL, LIQUID PHYSICAL FORM ROHS COMPLIANT UNIT PACKAGE 16 OUNCE FILM TYPE DRY, CLEAR, NON-HARDENING ODOR MILD SOLVENT BOILING POINT 118.4 DEG F PROPELLANT TYPE HYDROCARBON DIELECTRIC STRENGTH 350 MILLIVOLT SPECIFIC GRAVITY 0.6694 EVAPORATION RATE FAST VAPOR PRESSURE 1577.3 HECTOPASCAL VAPOR DENSITY GREATER THAN 1 (AIR EQUAL TO 1) VOC CONTENT 649.9 GPL OVERALL DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 7.75 INCH HEIGHT APPLICABLE STANDARD NSF H1
$
12.91
Qty:
Part #:CRC14050
- AEROSOL CONTAINER TYPE TAPPING, THREADING, DRILLING, SAWING, SHEARING, TURNING, REAMING ITEM TYPE 300 DEG F TEMPERATURE RANGE 16 OUNCE CONTAINER SIZE PHYSICAL STATE LIQUID COLOR BROWN BASE TYPE PETROLEUM VOC CONTENT 184.8 GALLON PER LITER MELTING POINT -40 DEG F FLASH POINT 300 DEG F NET FILL 12 OUNCE UNIT DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 7.75 INCH HEIGHT APPLICABLE STANDARD NSF P1
$
12.57
Qty:
Part #:CRC14077
- POLYURETHANE TYPE TAN COLOR UL APPLICABLE STANDARD FILLING, INSULATING, SEALING, BONDING, HVAC, ELECTRICAL, INDUSTRIAL, PLUMBING, AROUND ELECTRICAL OUTLET, UTILITY PANEL, DUCT, PIPE, DOOR, WINDOW, BASE PLATE, JOINT, CRACK, CRAWLSPACE, FOUNDATION, SPOT INSULATING, TOUCH-UP APPLICATION -200 TO 200 DEG F TEMPERATURE RATING AEROSOL CAN CONTAINER TYPE 16 OUNCE CONTAINER CAPACITY 12 TO 24 HOUR (CURE TIME) SETTING TIME ROHS COMPLIANT OVERALL DIMENSION 2.19 INCH WIDTH X 2.19 INCH DEPTH X 8.06 INCH HEIGHT SPECIFIC GRAVITY 1.2 VOC CONTENT 35 GRAM PER LITER NET FILL 12 OUNCE
$
16.54
Qty:
Part #:CRC18414
- CORROSION TYPE GRAY COLOR THREAD, EXPOSED EDGE, FASTENER, CONDUIT, STRAPPING, WELD, FENCING, RAILING, GRATE, ELECTRICAL POLE, BREAKER PANEL HOUSING, RAIN SPOUT, SIGN, DOOR, TRAILER, WASTE CONTAINER, CATWALK, GUARD RAIL APPLICATION AEROSOL, BOTTLE CONTAINER TYPE 13 OUNCE CONTAINER SIZE 15 TO 30 MINUTE DRYING TIME BRIGHT ZINC-IT[R] BRAND OVERALL DIMENSION 5.62 INCH WIDTH X 11.31 INCH DEPTH X 8.68 INCH HEIGHT
$
16.58
Qty:
Part #:CAD812M24SM
- H-MSM CONDUIT SNAP CLOSE CLIP, 360 DEGREE PIVOT TYPE ARMOR SPRING STEEL MATERIAL HAMMER-ON INSTALLATION UL, CUL, UL (CANADA AND US) APPROVAL SIDE MOUNTING 100 STANDARD PACKAGE 1/2 TO 3/4 INCH EMT/RIGID CONDUIT SIZE 25 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE CADDY[R] BRAND OUTER DIAMETER 0.709 TO 1.181 INCH
$
2.44
Qty:
Part #:CAD812M24
- EM-M CONDUIT SNAP CLOSE CLIP, 360 DEGREE PIVOT TYPE ARMOR SPRING STEEL MATERIAL HAMMER-ON INSTALLATION SIDE MOUNTING 100 STANDARD PACKAGE 1/2 TO 3/4 INCH EMT/RIGID CONDUIT SIZE 75 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE CADDY[R] BRAND OUTER DIAMETER 0.71 TO 1.181 INCH
$
3.07
Qty:
Part #:CADKX
- CABLE/CONDUIT CLIP TYPE ARMOR SPRING STEEL MATERIAL UL, CUL, UL (CANADA AND US) APPROVAL 100 STANDARD PACKAGE (2) 14 AWG TO (3) 12 AWG (ARMORED/METALLIC CABLE) CONDUIT/CABLE SIZE CADDY[R] BRAND OUTER DIAMETER 0.472 INCH
$
0.90
Qty:
Part #:CADK12
- CABLE/CONDUIT CLIP TYPE CADDY ARMOUR SPRING STEEL MATERIAL UL (CANADA AND US) APPROVAL 100 PER PACK STANDARD PACKAGE 15 POUND (VERTICAL), 100 POUND (HORIZONTAL) LOAD CAPACITY 1/2 TO 3/4 INCH (RIGID/EMT), 1 INCH (EMT) CONDUIT/CABLE SIZE ERICO INTERNATIONAL CORPORATION BRAND OUTER DIAMETER 0.945 INCH
$
0.85
Qty:
Part #:CADCNB812M
- NAIL BRACKET TYPE 100 PER BOX STANDARD PACKAGE 1/2 INCH, 3/4 INCH CONDUIT CONDUIT/CABLE SIZE CADDY. BRAND CNB MODEL
$
2.19
Qty:
Part #:CADMP1S
- 1-GANG TYPE PRE-GALVANIZED STEEL MATERIAL 1/2 TO 5/8 INCH DRYWALL INSTALLATION UL (CANADA AND US) APPROVAL STUD, SCREW-ON, NAIL MOUNTING 25 STANDARD PACKAGE CADDY[R] BRAND OVERALL DIMENSION 4 INCH WIDTH X 4-1/2 INCH HEIGHT MOUNTING HOLE SIZE 0.156 INCH (HOLE 1), 0.187 INCH (HOLE 2)
$
2.52
Qty:
Part #:CADCAT32HP
- J-HOOK, WIDE BASE TYPE PRE-GALVANIZED STEEL MATERIAL UL (CANADA AND US) APPROVAL 50 PER PACK STANDARD PACKAGE 60 POUND LOAD CAPACITY 2 INCH DIAMETER FITTING SIZE ERICO INTERNATIONAL CORPORATION BRAND CABLE CAPACITY 90 (CAT 5E), 60 (CAT 6) AREA 3.97 SQUARE INCH APPLICABLE STANDARD DIN 4102-12, EN 50174-2, IEC 14763-2, TIA 568, TIA 569
$
4.60
Qty:
Part #:CAD4G16
- T-BAR TO ELECTRICAL FIXTURE TYPE CADDY ARMOUR SPRING STEEL MATERIAL ELECTRICAL FIXTURE USED ON TWIST-ON INSTALLATION UL APPROVAL 100 PER PACK STANDARD PACKAGE 50 POUND LOAD CAPACITY 9/16 INCH LENGTH X 1/4 INCH DIAMETER SCREW FASTENER TYPE 15/16 INCH T BAR SIZE ERICO INTERNATIONAL CORPORATION BRAND INCLUDES WING NUT
$
1.82
Qty:
Part #:CAD512
- T-BAR TO ELECTRICAL BOX TYPE PRE-GALVANIZED CADDY ARMOUR SPRING STEEL MATERIAL ELECTRICAL BOX/CONDUIT USED ON SNAP-ON INSTALLATION 50 PER PACK STANDARD PACKAGE 20 POUND LOAD CAPACITY 24 INCH SPAN BOX HANGER FASTENER TYPE ERICO INTERNATIONAL CORPORATION BRAND INCLUDES MOUNTING CLIP AND SCREW
$
14.96
Qty:
Part #:CAD65
- UL (CANADA AND US) APPLICABLE STANDARD WELDING MATERIAL CADWELD USED ON MODEL/BRAND MOLD USED ON ITEM XBCY1Y1 USED ON ITEM PART NO CADWELD[R] PLUS BRAND SIZE IDENTIFICATION RING COLOR DARK GREEN
$
9.74
Qty:
$
23.52
Qty:
Part #:SELSS201-1-BG
- BAT TOGGLE TYPE 0.66 INCH W X 0.9 INCH D X 0.925 INCH H SIZE 0.562 INCH TOGGLE LENGTH SPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC VOLTAGE RATING 15/32 INCH-32 TPI X 0.325 INCH L BUSHING MOUNTING 6 AMPERE AT 125 VAC, 3 AMPERE AT 250 VAC CURRENT RATING SCREW TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL MOUNTING HOLE DIAMETER 0.5 INCH
$
19.33
BG
Qty:
Part #:SELSS202P-BG
- BAT HANDLE TYPE 0.634 INCH WIDTH X 1.107 INCH DEPTH X 1.134 INCH HEIGHT SIZE 0.687 INCH TOGGLE LENGTH SPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VOLT AC VOLTAGE RATING 15/32 INCH-32 TPI X 0.465 INCH LENGTH BUSHING MOUNTING 20 AMP AT 125 VOLT AC, 12 AMP AT 250 VOLT AC CURRENT RATING 0.25 INCH SPADE TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL SELECTA BRAND MOUNTING HOLE DIAMETER 0.5 INCH POWER RATING 1 HP AT 125 TO 250 VOLT AC
$
8.10
BG
Qty:
Part #:SELSS203P-BG
- BAT TOGGLE TYPE 0.75 INCH W X 1.25 INCH D X 1.312 INCH H SIZE 0.687 INCH TOGGLE LENGTH DPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC VOLTAGE RATING 15/32 INCH-32 TPI X 0.469 INCH L BUSHING MOUNTING 20 AMPERE AT 250 VAC CURRENT RATING 0.25 INCH SPADE TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL MOUNTING HOLE DIAMETER 0.5 INCH
$
21.62
BG
Qty:
Displaying: 1 - 24 of 107 Matching Items