Ul 217, Nfpa 72, (Chapter 11) the State of California Fire Marshall, Nfpa 101 (One and Two Family Dwellings), Federal Housing Authority (Fha), Housing and Urban Development (Hud)
Iec 60900 and Astm F1505
View:
Part #:KIDI4618A
- The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation
&bull Front battery pull tab allows battery activation without removing alarm from mounting bracket.
&bull Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
&bull Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
&bull Large centrally located Test/Hush® alarm control button.
&bull Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features
&bull Easy access front loading battery door.
&bull Battery backup provides protection in case of power failure.
&bull Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user&rsquos guide for complete instructions.
Technical Specifications
Model
i4618
UPC
0-47871-07581-2
Power Source
120VAC (80mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40°F (4.4°C) to 100°F (37.8°C)
Humidity Range
Up to 85% relative humidity (RH)
Size
5.6 in diameter x 1.8 in depth
Weight
.5lbs
Interconnects
Up to 24 Kidde devices
LED
Green, receiving ac power,Red, 4 modes of operation
Warranty
5 year limited
$
12.77
Qty:
Part #:I12040
- SMOKE ALARM WITH STROBE LIGHT TYPE AC/DC IONIZATION OPERATION TYPE UL APPROVAL 85 DB AT 10 FT HORN TYPE 120 VAC 60 HZ WITH 9 V BATTERY BACKUP VOLTAGE RATING/SOURCE LED INDICATING CONDITION LED/STROBE TYPE 24 INTERCONNECTION(S) SIZE 6.5 INCH W X 13.25 INCH D X 6 INCH H
$
23.04
Qty:
Part #:KLE33532-INS
- PHILLIPS, CABINET SCREWDRIVER SET TYPE 2 PIECE(S) HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL BLACK HANDLE COLOR (1) #2 PROFILATED PHILLIPS, (1) 1/4 INCH CABINET SCREWDRIVER SET CONTENT KLEIN BRAND HANDLE TYPE DUAL INSULATED CUSHION GRIP BLADE MATERIAL INDUCTION HARDENED STEEL APPLICATION WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900, ASTM F1505
Qty:
Part #:KLE200028EINS
- HOT-RIVETED JOINT, INSULATED TYPE STEEL MATERIAL 8-1/4 INCH OVERALL LENGTH 13/16 INCH JAW LENGTH 1-3/16 INCH JAW WIDTH CUTS ACSR, SCREWS, NAILS, MOST HARDENED WIRE APPLICATION INDUCTION HARDENED (BODY), FORGED (HANDLE) PROCESS STEEL HANDLE MATERIAL ORANGE/GRAY HANDLE COLOR DIAGONAL, TAPERED NOSE JAW TYPE 2000 SERIES[TM] BRAND HANDLE LENGTH 6-3/4 INCH JAW THICKNESS 7/16 INCH KNIFE LENGTH STANDARD APPLICABLE STANDARD IEC 60900, ASTM F1505
Qty:
Part #:KLE602-4-INS
- CABINET TYPE 8-5/16 INCH OVERALL LENGTH 4 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR 1/4 INCH TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:KLE603-4-INS
- PHILLIPS TYPE 8-5/16 INCH OVERALL LENGTH 4 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR #2 TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:KLE6037INS
- PHILLIPS TYPE 11-5/16 INCH OVERALL LENGTH 7 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR #2 TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Displaying: 1 - 7 of 7 Matching Items