Ul 217, Nfpa 72, (Chapter 11) the State of California Fire Marshall, Nfpa 101 (One and Two Family Dwellings), Federal Housing Authority (Fha), Housing and Urban Development (Hud)
Rohs
View:
Part #:IDE74-031
- BENDER HEAD TYPE ALUMINUM MATERIAL NO HANDLE INCLUDED 1/2 INCH EMT CONDUIT SIZE INCLUDES CONVENIENT BENDING GUIDE
$
37.71
Qty:
Part #:KIDI4618A
- The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation
&bull Front battery pull tab allows battery activation without removing alarm from mounting bracket.
&bull Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
&bull Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
&bull Large centrally located Test/Hush® alarm control button.
&bull Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features
&bull Easy access front loading battery door.
&bull Battery backup provides protection in case of power failure.
&bull Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user&rsquos guide for complete instructions.
Technical Specifications
Model
i4618
UPC
0-47871-07581-2
Power Source
120VAC (80mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40°F (4.4°C) to 100°F (37.8°C)
Humidity Range
Up to 85% relative humidity (RH)
Size
5.6 in diameter x 1.8 in depth
Weight
.5lbs
Interconnects
Up to 24 Kidde devices
LED
Green, receiving ac power,Red, 4 modes of operation
Warranty
5 year limited
$
12.77
Qty:
Part #:I12040
- SMOKE ALARM WITH STROBE LIGHT TYPE AC/DC IONIZATION OPERATION TYPE UL APPROVAL 85 DB AT 10 FT HORN TYPE 120 VAC 60 HZ WITH 9 V BATTERY BACKUP VOLTAGE RATING/SOURCE LED INDICATING CONDITION LED/STROBE TYPE 24 INTERCONNECTION(S) SIZE 6.5 INCH W X 13.25 INCH D X 6 INCH H
$
23.04
Qty:
Part #:IDE31-338
- PULLING TYPE POLYFIBER MATERIAL WHITE, GRAY TRACER COLOR 6500 FT CONDUIT USED ON 190 LB TENSILE STRENGTH BUCKET PACKAGING TYPE VALU-LINE[TM] BRAND
$
50.52
Qty:
Part #:IDE31-340
- PULLING, FISHING TYPE POLYFIBER MATERIAL WHITE WITH BLUE TRACER COLOR 6500 FOOT POWER FISHING SYSTEM, CONDUIT USED ON 210 POUND TENSILE STRENGTH BUCKET PACKAGING TYPE IDEAL BRAND
$
62.51
Qty:
Part #:IDE31-344
- PULLING TYPE POLYFIBER MATERIAL WHITE, RED TRACER COLOR 2200 FT CONDUIT USED ON 500 LB TENSILE STRENGTH BUCKET PACKAGING TYPE POWR-FISH[R] BRAND
$
83.89
Qty:
Part #:IDE44-800
- PLATED AND VINYL COATED ANODIZED ALUMINUM ALLOY MATERIAL RUSTPROOF CONSTRUCTION 1 INCH JAW DIAMETER IDEAL BRAND
$
49.69
Qty:
Part #:IDE44-801
- PLATED AND VINYL COATED ANODIZED ALUMINUM ALLOY MATERIAL 1-1/2 INCH JAW DIAMETER CONSTRUCTIONAL FEATURE RUSTPROOF
$
41.81
Qty:
Part #:IDE46-400
- DIRECT BURIAL, UNDERGROUND FEEDER CABLE TYPE HEAVY WALL HEAT SHRINKABLE TUBE, 4-POSITION BARREL CONNECTOR CONTENTS UL 486D APPROVAL 600 VOLT VOLTAGE RATING 14 TO 8 AWG CONDUCTOR SIZE HEAT SHRINK TUBE INSULATOR TYPE IDEAL BRAND ROHS COMPLIANT TUBING SIZE 1.1 INCH DIAMETER X 8 INCH LENGTH TEMPERATURE RATING 105 DEG C
$
20.71
Qty:
Part #:IDE46-411
- SELF SEAL TYPE UNDERGROUND FEEDER CABLE TYPE HEAT SHRINK TUBE CONTENTS UL 486D APPROVAL 600 V VOLTAGE RATING 14 TO 10 AWG CONDUCTOR SIZE HEAT SHRINK TUBE INSULATOR TYPE THERMO-SHRINK[R] BRAND TEMPERATURE RATING 105 DEG C
$
57.39
Qty:
Part #:IDE74-026
- BENDER HEAD WITH HANDLE TYPE DUCTILE IRON MATERIAL YES HANDLE INCLUDED 1/2 INCH EMT CONDUIT SIZE IDEAL BRAND
$
72.33
Qty:
Part #:IDE74-027
- BENDER HEAD WITH HANDLE TYPE DUCTILE IRON MATERIAL YES HANDLE INCLUDED 3/4 INCH EMT CONDUIT SIZE 1/2 INCH RIGID/IMC CONDUIT SIZE IDEAL BRAND
$
92.20
Qty:
Part #:IDE74-028
- BENDER HEAD WITH HANDLE TYPE DUCTILE IRON MATERIAL YES HANDLE INCLUDED 1 INCH EMT CONDUIT SIZE 3/4 INCH RIGID/IMC CONDUIT SIZE IDEAL BRAND
$
118.57
Qty:
Displaying: 1 - 13 of 13 Matching Items