s.e.s.
SELECTA-PRODUCTS
View:
Active Filters :
- Mfr / Trade Name: SELECTA-PRODUCTS s.e.s. Tiffin
$
45.02
Qty:
$
29.49
Qty:
Part #:BRK9120B
- 120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money.
» Single button test/silence » 9V Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Smart Technology - helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » 10-Year Limited Warranty
$
10.73
Qty:
Part #:BRKSC9120B
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
44.25
Qty:
Part #:TIFF6110
- HOT DIP GALVANIZED FINISH 10 INCH 4 INCH THREAD LENGTH 5/8 INCH NOMINAL DIAMETER 5/8 NOMINAL DIAMETER - FRACTIONAL SQUARE HEAD STYLE
$
5.26
Qty:
Part #:TIFF6280
- OVAL EYE TYPE 10 INCH 10 LENGTH - DECIMAL 10 LENGTH - FRACTIONAL 4 INCH THREAD LENGTH 5/8 INCH NOMINAL DIAMETER 5/8 NOMINAL DIAMETER - FRACTIONAL .625 NOMINAL DIAMETER - DECIMAL PP[T] BRAND WITH SQUARE NUT EYE INNER DIMENSION 1-1/2 INCH WIDTH X 2 INCH LENGTH WEIGHT 136 LB PER 100 PIECES PACKAGING QUANTITY 10 FINISH/COATING GALVANIZED LENGTH - DECIMAL - UOM IN NOMINAL DIAMETER - DECIMAL - UOM IN
$
11.07
Qty:
Part #:TIFF6370
- PLAIN TYPE 10 INCH 10 LENGTH - DECIMAL 10 LENGTH - FRACTIONAL 4 INCH THREAD LENGTH 5/8 INCH NOMINAL DIAMETER 5/8 NOMINAL DIAMETER - FRACTIONAL .625 NOMINAL DIAMETER - DECIMAL 1/2 INCH EYE INNER DIAMETER .5 EYE INNER DIAMETER - DECIMAL 1/2 EYE INNER DIAMETER - FRACTIONAL PP[T] BRAND WITH SQUARE NUT WEIGHT 145 LB PER 100 PIECES PACKAGING QUANTITY 10 EYE INNER DIAMETER - DECIMAL - UOM IN FINISH/COATING HOT DIPPED GALVANIZED LENGTH - DECIMAL - UOM IN NOMINAL DIAMETER - DECIMAL - UOM IN
$
15.30
Qty:
Part #:TIFF6380
- ANGLE TYPE 10 INCH 10 LENGTH - DECIMAL 10 LENGTH - FRACTIONAL 4 INCH THREAD LENGTH 5/8 INCH NOMINAL DIAMETER 5/8 NOMINAL DIAMETER - FRACTIONAL .625 NOMINAL DIAMETER - DECIMAL 1/2 INCH EYE INNER DIAMETER .5 EYE INNER DIAMETER - DECIMAL 1/2 EYE INNER DIAMETER - FRACTIONAL PP[T] BRAND WITH SQUARE NUT WEIGHT 150 LB PER 100 PIECES PACKAGING QUANTITY 10 EYE INNER DIAMETER - DECIMAL - UOM IN FINISH/COATING HOT DIPPED GALVANIZED LENGTH - DECIMAL - UOM IN NOMINAL DIAMETER - DECIMAL - UOM IN
$
8.90
Qty:
Part #:TIFF6382
- ANGLE TYPE 12 INCH 12 LENGTH - DECIMAL 12 LENGTH - FRACTIONAL 6 INCH THREAD LENGTH 5/8 INCH NOMINAL DIAMETER 5/8 NOMINAL DIAMETER - FRACTIONAL .625 NOMINAL DIAMETER - DECIMAL 1/2 INCH EYE INNER DIAMETER .5 EYE INNER DIAMETER - DECIMAL 1/2 EYE INNER DIAMETER - FRACTIONAL PP[T] BRAND WITH SQUARE NUT WEIGHT 165 LB PER 100 PIECES PACKAGING QUANTITY 10 EYE INNER DIAMETER - DECIMAL - UOM IN FINISH/COATING HOT DIPPED GALVANIZED LENGTH - DECIMAL - UOM IN NOMINAL DIAMETER - DECIMAL - UOM IN
$
8.32
Qty:
$
23.52
Qty:
Part #:SELSS201-1-BG
- BAT TOGGLE TYPE 0.66 INCH W X 0.9 INCH D X 0.925 INCH H SIZE 0.562 INCH TOGGLE LENGTH SPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC VOLTAGE RATING 15/32 INCH-32 TPI X 0.325 INCH L BUSHING MOUNTING 6 AMPERE AT 125 VAC, 3 AMPERE AT 250 VAC CURRENT RATING SCREW TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL MOUNTING HOLE DIAMETER 0.5 INCH
$
19.33
BG
Qty:
Part #:SELSS202P-BG
- BAT HANDLE TYPE 0.634 INCH WIDTH X 1.107 INCH DEPTH X 1.134 INCH HEIGHT SIZE 0.687 INCH TOGGLE LENGTH SPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VOLT AC VOLTAGE RATING 15/32 INCH-32 TPI X 0.465 INCH LENGTH BUSHING MOUNTING 20 AMP AT 125 VOLT AC, 12 AMP AT 250 VOLT AC CURRENT RATING 0.25 INCH SPADE TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL SELECTA BRAND MOUNTING HOLE DIAMETER 0.5 INCH POWER RATING 1 HP AT 125 TO 250 VOLT AC
$
8.10
BG
Qty:
Part #:SELSS203P-BG
- BAT TOGGLE TYPE 0.75 INCH W X 1.25 INCH D X 1.312 INCH H SIZE 0.687 INCH TOGGLE LENGTH DPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC VOLTAGE RATING 15/32 INCH-32 TPI X 0.469 INCH L BUSHING MOUNTING 20 AMPERE AT 250 VAC CURRENT RATING 0.25 INCH SPADE TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL MOUNTING HOLE DIAMETER 0.5 INCH
$
21.62
BG
Qty:
Part #:SELSS204-4-BG
- BAT TOGGLE TYPE 0.524 INCH W X 0.56 INCH D X 1.305 INCH H SIZE 0.687 INCH TOGGLE LENGTH SPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC/VDC VOLTAGE RATING 15/32 INCH-32 TPI X 0.465 INCH L BUSHING MOUNTING 6 AMPERE AT 125 VAC/VDC, 3 AMPERE AT 250 VAC/VDC CURRENT RATING SCREW TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL MOUNTING HOLE DIAMETER 0.5 INCH
$
19.40
BG
Qty:
Part #:SELSS205-5-BG
- BAT TOGGLE TYPE 0.524 INCH W X 0.56 INCH D X 0.89 INCH H SIZE 0.687 INCH TOGGLE LENGTH SPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC/VDC VOLTAGE RATING 15/32 INCH-32 TPI X 0.465 INCH L BUSHING MOUNTING 10 AMPERE AT 125 VAC/VDC, 5 AMPERE AT 250 VAC/VDC CURRENT RATING 6 INCH WIRE LEAD TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL MOUNTING HOLE DIAMETER 0.5 INCH POWER RATING 1/4 HP AT 125 TO 250 VAC/VDC
$
15.16
BG
Qty:
$
17.95
E
Qty:
Part #:SELSS207-7A-BG
- BAT TOGGLE TYPE 0.75 INCH W X 1.14 INCH D X 1.30 INCH H SIZE 0.687 INCH TOGGLE LENGTH DPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC VOLTAGE RATING 15/32 INCH-32 TPI X 0.465 INCH L BUSHING MOUNTING 20 AMPERE AT 250 VAC CURRENT RATING SCREW TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL MOUNTING HOLE DIAMETER 0.5 INCH
$
24.60
BG
Qty:
Part #:SELSS208-16-BG
- BAT TOGGLE TYPE 0.75 INCH W X 1.14 INCH D X 1.30 INCH H SIZE 0.687 INCH TOGGLE LENGTH DPDT CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF/MAINTAINED ON OPERATION TYPE 125/250 VAC VOLTAGE RATING 15/32 INCH-32 TPI X 0.465 INCH L BUSHING MOUNTING 20 AMPERE AT 250 VAC CURRENT RATING SCREW TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL MOUNTING HOLE DIAMETER 0.5 INCH
$
31.38
BG
Qty:
Part #:SELSS209-8-BG
- BAT TOGGLE TYPE 0.836 INCH W X 0.765 INCH D X 1.764 INCH H SIZE 0.687 INCH TOGGLE LENGTH SPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC/VDC VOLTAGE RATING 15/32 INCH-32 TPI X 0.465 INCH L BUSHING MOUNTING 16 AMPERE AT 125 VAC/VDC, 8 AMPERE AT 250 VAC/VDC CURRENT RATING SCREW TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL MOUNTING HOLE DIAMETER 0.5 INCH POWER RATING 1 HP AT 125 TO 250 VAC/VDC
$
24.55
BG
Qty:
Part #:SELSS210-9-BG
- BAT TOGGLE TYPE 0.836 INCH W X 0.765 INCH D X 1.764 INCH H SIZE 0.687 INCH TOGGLE LENGTH DPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC/VDC VOLTAGE RATING 15/32 INCH-32 TPI X 0.465 INCH L BUSHING MOUNTING 16 AMPERE AT 125 VAC/VDC, 8 AMPERE AT 250 VAC/VDC CURRENT RATING SCREW TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL MOUNTING HOLE DIAMETER 0.5 INCH POWER RATING 1 HP AT 125 TO 250 VAC/VDC
$
29.66
BG
Qty:
Part #:SELSS211-16A-BG
- BAT TOGGLE TYPE 1 INCH W X 0.895 INCH D X 2 INCH H SIZE 0.687 INCH TOGGLE LENGTH DPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC/VDC VOLTAGE RATING 15/32 INCH-32 TPI X 0.465 INCH L BUSHING MOUNTING 20 AMPERE AT 125 VAC/VDC, 10 AMPERE AT 250 VAC/VDC CURRENT RATING SCREW TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL MOUNTING HOLE DIAMETER 0.5 INCH POWER RATING 1-1/2 HP AT 125 TO 250 VAC/VDC
$
40.51
BG
Qty:
Displaying: 1 - 24 of 107 Matching Items