Tiffin
s.e.s.
Part #:BRK9120B
- 120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money.
» Single button test/silence » 9V Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Smart Technology - helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » 10-Year Limited Warranty
$
10.73
Qty:
Part #:BRKSC9120B
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
44.25
Qty:
Part #:TIFF6110
- HOT DIP GALVANIZED FINISH 10 INCH 4 INCH THREAD LENGTH 5/8 INCH NOMINAL DIAMETER 5/8 NOMINAL DIAMETER - FRACTIONAL SQUARE HEAD STYLE
$
5.26
Qty:
Part #:TIFF6280
- OVAL EYE TYPE 10 INCH 10 LENGTH - DECIMAL 10 LENGTH - FRACTIONAL 4 INCH THREAD LENGTH 5/8 INCH NOMINAL DIAMETER 5/8 NOMINAL DIAMETER - FRACTIONAL .625 NOMINAL DIAMETER - DECIMAL PP[T] BRAND WITH SQUARE NUT EYE INNER DIMENSION 1-1/2 INCH WIDTH X 2 INCH LENGTH WEIGHT 136 LB PER 100 PIECES PACKAGING QUANTITY 10 FINISH/COATING GALVANIZED LENGTH - DECIMAL - UOM IN NOMINAL DIAMETER - DECIMAL - UOM IN
$
11.07
Qty:
Part #:TIFF6370
- PLAIN TYPE 10 INCH 10 LENGTH - DECIMAL 10 LENGTH - FRACTIONAL 4 INCH THREAD LENGTH 5/8 INCH NOMINAL DIAMETER 5/8 NOMINAL DIAMETER - FRACTIONAL .625 NOMINAL DIAMETER - DECIMAL 1/2 INCH EYE INNER DIAMETER .5 EYE INNER DIAMETER - DECIMAL 1/2 EYE INNER DIAMETER - FRACTIONAL PP[T] BRAND WITH SQUARE NUT WEIGHT 145 LB PER 100 PIECES PACKAGING QUANTITY 10 EYE INNER DIAMETER - DECIMAL - UOM IN FINISH/COATING HOT DIPPED GALVANIZED LENGTH - DECIMAL - UOM IN NOMINAL DIAMETER - DECIMAL - UOM IN
$
15.30
Qty:
Part #:TIFF6380
- ANGLE TYPE 10 INCH 10 LENGTH - DECIMAL 10 LENGTH - FRACTIONAL 4 INCH THREAD LENGTH 5/8 INCH NOMINAL DIAMETER 5/8 NOMINAL DIAMETER - FRACTIONAL .625 NOMINAL DIAMETER - DECIMAL 1/2 INCH EYE INNER DIAMETER .5 EYE INNER DIAMETER - DECIMAL 1/2 EYE INNER DIAMETER - FRACTIONAL PP[T] BRAND WITH SQUARE NUT WEIGHT 150 LB PER 100 PIECES PACKAGING QUANTITY 10 EYE INNER DIAMETER - DECIMAL - UOM IN FINISH/COATING HOT DIPPED GALVANIZED LENGTH - DECIMAL - UOM IN NOMINAL DIAMETER - DECIMAL - UOM IN
$
8.90
Qty:
Part #:TIFF6382
- ANGLE TYPE 12 INCH 12 LENGTH - DECIMAL 12 LENGTH - FRACTIONAL 6 INCH THREAD LENGTH 5/8 INCH NOMINAL DIAMETER 5/8 NOMINAL DIAMETER - FRACTIONAL .625 NOMINAL DIAMETER - DECIMAL 1/2 INCH EYE INNER DIAMETER .5 EYE INNER DIAMETER - DECIMAL 1/2 EYE INNER DIAMETER - FRACTIONAL PP[T] BRAND WITH SQUARE NUT WEIGHT 165 LB PER 100 PIECES PACKAGING QUANTITY 10 EYE INNER DIAMETER - DECIMAL - UOM IN FINISH/COATING HOT DIPPED GALVANIZED LENGTH - DECIMAL - UOM IN NOMINAL DIAMETER - DECIMAL - UOM IN
$
8.32
Qty:
Part #:TIFF6912
- HOT DIP GALVANIZED FERROUS, PORCELAIN MATERIAL SERVICE ENTRANCE MAST APPLICATION 1-1/4 TO 2-1/2 INCH PIPE SIZE
$
15.44
Qty:
Part #:TIFF6913
- HOT DIP GALVANIZED FERROUS, PORCELAIN MATERIAL SERVICE ENTRANCE MAST APPLICATION 3 TO 4 INCH PIPE SIZE
$
28.55
Qty:
Part #:TIFF7530
- HOT DIP GALVANIZED FINISH 2 INCH MIN. PIPE SIZE 2 INCH MAX. PIPE SIZE 2 MIN. PIPE SIZE - DECIMAL 2 MAX. PIPE SIZE - DECIMAL 2 MIN. PIPE SIZE - FRACTIONAL 2 MAX. PIPE SIZE - FRACTIONAL #22 HANGER MOUNTING SIZE PP[T] BRAND WEIGHT 40 LB PER 100 PIECES HANGER ROD LENGTH 2-1/4 INCH STANDARD PACKAGE 25 MAXIMUM PIPE SIZE - DECIMAL - UOM IN MINIMUM PIPE SIZE - DECIMAL - UOM IN
$
3.84
Qty:
Part #:TIFF7534
- HOT DIP GALVANIZED FINISH 2 INCH MIN. PIPE SIZE 2 INCH MAX. PIPE SIZE 2 MIN. PIPE SIZE - DECIMAL 2 MAX. PIPE SIZE - DECIMAL 2 MIN. PIPE SIZE - FRACTIONAL 2 MAX. PIPE SIZE - FRACTIONAL 3/8 INCH HANGER MOUNTING SIZE PP[T] BRAND WEIGHT 60 LB PER 100 PIECES HANGER ROD LENGTH 10 INCH STANDARD PACKAGE 25 MAXIMUM PIPE SIZE - DECIMAL - UOM IN MINIMUM PIPE SIZE - DECIMAL - UOM IN
$
7.04
Qty:
Part #:TIFF7543
- ADJUSTABLE, ROD MOUNT TYPE HOT DIPPED GALVANIZED FINISH 2-1/2 INCH MIN. PIPE SIZE 2-1/2 INCH MAX. PIPE SIZE 2.5 MIN. PIPE SIZE - DECIMAL 2.5 MAX. PIPE SIZE - DECIMAL 2-1/2 MIN. PIPE SIZE - FRACTIONAL 2-1/2 MAX. PIPE SIZE - FRACTIONAL 1/2 INCH HANGER MOUNTING SIZE PP[T] BRAND WEIGHT 105 LB PER 100 PIECES STANDARD PACKAGING QUANTITY 10 PIECES USED FOR ATTACHING MAST PIPE TO FRAME, BRICK OR CEMENT BLOCK CONSTRUCTION BOLT LENGTH 10 INCH MAXIMUM PIPE SIZE - DECIMAL - UOM IN MINIMUM PIPE SIZE - DECIMAL - UOM IN
$
10.31
Qty:
Part #:TIFF1062
- SOLID BAIL TYPE ALUMINUM WEDGE, STAINLESS STEEL BAIL MATERIAL 6 1/2 INCH BAIL CONDUCTOR SIZE 4 TO 1/0 AWG ACSR
$
6.21
Qty:
Part #:TIFF1063
- SOLID BAIL TYPE ALUMINUM WEDGE, STAINLESS STEEL BAIL MATERIAL 6 1/2 INCH BAIL CONDUCTOR SIZE 2/0 TO 4/0 AWG ACSR
$
7.97
Qty:
Part #:TIFF7702
- ANCHOR LENGTH 48 INCH ANCHOR SIZE 5/8 INCH FINISH HOT DIP GALVANIZED HEAD TYPE WING MATERIAL PORCELAIN TYPE SCREW PP[T] BRAND APPLICATION FENCE, TREE WEIGHT 550 LB PER 100 PIECES
$
49.44
Qty:
Part #:TIFF7704
- ANCHOR LENGTH 60 INCH ANCHOR SIZE 5/8 INCH FINISH HOT DIP GALVANIZED HEAD TYPE WING MATERIAL PORCELAIN TYPE SCREW PP[T] BRAND APPLICATION FENCE, TREE WEIGHT 650 LB PER 100 PIECES
$
71.54
Qty:
Part #:TIFF7656
- GALVANIZED FINISH 6 FT 5/8 INCH NOMINAL DIAMETER 5/8 NOMINAL DIAMETER - FRACTIONAL SINGLE EYE WEIGHT 630 LB PER 100 STANDARD PACKAGE 1
$
45.23
Qty:
Part #:TIFF8624
- DOUBLE SADDLE TYPE MALLEABLE IRON MATERIAL 3/8 INCH ROPE DIAMETER .375 ROPE DIAMETER - DECIMAL COATING GALVANIZED ROPE DIAMETER - DECIMAL - UOM IN
$
2.45
Qty:
Part #:TIFF1061
- ALUMINUM (WEDGE), STAINLESS STEEL (BAIL) MATERIAL 6-1/2 INCH (BAIL) CABLE USED ON WEDGE GRIP CLAMP BAIL TYPE SOLID CABLE SIZE 6 TO 2 AWG ACSR
$
6.80
Qty:
Part #:TIFF1082
- CHAMFERED TOP, FLAT BOTTOM TYPE 5/8 INCH NOMINAL DIAMETER 5/8 NOMINAL DIAMETER - FRACTIONAL .625 NOMINAL DIAMETER - DECIMAL PP[T] BRAND WEIGHT 12 LB PER 100 PIECES PACKAGING QUANTITY 25 PIECES PER CARTON FINISH/COATING HOT DIP GALVANIZED NOMINAL DIAMETER - DECIMAL - UOM IN
$
1.97
Qty:
Displaying: 1 - 24 of 36 Matching Items