Ul 217, Nfpa 72, (Chapter 11) the State of California Fire Marshall, Nfpa 101 (One and Two Family Dwellings), Federal Housing Authority (Fha), Housing and Urban Development (Hud)
Ul (Canada and Us)
View:
Part #:BLINBR-32-4W
- THREADED BRIDLE RING TO WOOD BEAM TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL UL (CANADA AND US) APPROVAL 1/4 INCH MOUNTING SIZE 100 PER BOX STANDARD PACKAGE 50 LB LOAD CAPACITY 2 INCH FITTING SIZE BR MODEL
$
1.59
Qty:
Part #:KIDI4618A
- The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation
&bull Front battery pull tab allows battery activation without removing alarm from mounting bracket.
&bull Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
&bull Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
&bull Large centrally located Test/Hush® alarm control button.
&bull Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features
&bull Easy access front loading battery door.
&bull Battery backup provides protection in case of power failure.
&bull Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user&rsquos guide for complete instructions.
Technical Specifications
Model
i4618
UPC
0-47871-07581-2
Power Source
120VAC (80mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40°F (4.4°C) to 100°F (37.8°C)
Humidity Range
Up to 85% relative humidity (RH)
Size
5.6 in diameter x 1.8 in depth
Weight
.5lbs
Interconnects
Up to 24 Kidde devices
LED
Green, receiving ac power,Red, 4 modes of operation
Warranty
5 year limited
$
12.77
Qty:
Part #:I12040
- SMOKE ALARM WITH STROBE LIGHT TYPE AC/DC IONIZATION OPERATION TYPE UL APPROVAL 85 DB AT 10 FT HORN TYPE 120 VAC 60 HZ WITH 9 V BATTERY BACKUP VOLTAGE RATING/SOURCE LED INDICATING CONDITION LED/STROBE TYPE 24 INTERCONNECTION(S) SIZE 6.5 INCH W X 13.25 INCH D X 6 INCH H
$
23.04
Qty:
Part #:CUTTP431MSB
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL MSB BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (4) 1/2 INCH SIDE, (2) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 11 KNOCKOUT(S) (1) BOTTOM, (6) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION ARMORED/METAL CLAD CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
20.97
Qty:
Part #:BLINBA-4-16
- T BAR TO ELECTRICAL FIXTURE TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL T-BAR USED ON TWIST-ON INSTALLATION UL (CANADA AND US) APPROVAL 100 PER BOX STANDARD PACKAGE 50 LB LOAD CAPACITY 1/4 INCH-20 TPI X 5/8 INCH L STUD FASTENER TYPE 15/16 INCH T BAR SIZE FINISH BLACK BA MODEL
$
0.99
Qty:
Part #:BLINBG-8-12-U-2-4
- 360 DEGREE PIVOT TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL HAMMER-ON, PLIERS INSTALLATION UL (CANADA AND US) APPROVAL BOTTOM MOUNTING 100 PER BOX STANDARD PACKAGE 1/2 INCH, 3/4 INCH CONDUIT SIZE 75 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE COOPER B-LINE BRAND BG MODEL
$
1.31
Qty:
Part #:BLINBG-8-12-U-5-8
- 360 DEG PIVOT TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL HAMMER ON, PLIER INSTALLATION UL (CANADA AND US) APPROVAL BOTTOM MOUNTING 100 PER BOX STANDARD PACKAGE 1/2, 3/4 INCH CONDUIT SIZE 75 LB LOAD CAPACITY 5/16 TO 1/2 INCH BEAM/FLANGE SIZE GUIDE-RITE[TM] BRAND BG MODEL
$
1.46
Qty:
Part #:BLINBG-16-U-2-4
- 360 DEGREE PIVOT TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL HAMMER-ON, PLIERS INSTALLATION UL (CANADA AND US) APPROVAL BOTTOM MOUNTING 100 PER BOX STANDARD PACKAGE 1 INCH CONDUIT SIZE 75 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE COOPER B-LINE BRAND BG MODEL
$
1.43
Qty:
Part #:BLINBW-8
- ASTM A684/AISI 1055 HEAT TREATED HIGH CARBON COLD ROLLED STEEL MATERIAL UL (CANADA AND US) APPROVAL 100 PER BOX STANDARD PACKAGE 100 POUND (HORIZONTAL FLANGE), 25 POUND (VERTICAL FLANGE), 50 POUND (VERTICAL WIRE OR ROD) LOAD CAPACITY 1/2 INCH EMT/RIGID CONDUIT/CABLE SIZE COOPER B-LINE BRAND ROD SIZE 3/16 INCH, 1/4 INCH BW MODEL
$
0.50
Qty:
Part #:BLINBW-12
- ASTM A684/AISI 1055 HEAT TREATED HIGH CARBON COLD ROLLED STEEL MATERIAL UL (CANADA AND US) APPROVAL 100 PER BOX STANDARD PACKAGE 100 POUND (HORIZONTAL FLANGE), 25 POUND (VERTICAL FLANGE), 50 POUND (VERTICAL WIRE OR ROD) LOAD CAPACITY 1/2 OR 3/4 INCH (EMT/RIGID) CONDUIT/CABLE SIZE COOPER B-LINE BRAND ROD SIZE 3/16 INCH, 1/4 INCH BW MODEL
$
0.55
Qty:
Part #:BLINBA50
- T-BAR TO BOX ASSEMBLY TYPE PRE-GALVANIZED ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL SQUARE/OCTAGONAL BOX USED ON UL (CANADA AND US) APPROVAL 25 PER BOX STANDARD PACKAGE 70 POUND LOAD CAPACITY 24 INCH SPAN BOX HANGER FASTENER TYPE COOPER B-LINE BRAND BA MODEL
$
6.45
Qty:
Part #:BLINBRS-32A
- BRIDLE RING TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL UL (CANADA AND US) APPROVAL 50 PER BOX STANDARD PACKAGE 2 INCH RING FITTING SIZE THREAD SIZE 1/4 INCH-20 TPI X 7/8 INCH BRS MODEL
$
2.59
Qty:
Displaying: 1 - 12 of 12 Matching Items