Ionization
Dual Ionization & Electrochemical
View:
Active Filters :
Part #:KIDI9040E
- The Fire Sentry i9040 smoke alarm is a battery operated smoke alarm that utilizes ionization sensing technology. The four (4) inch unit is smaller in diameter giving it discreet design with the same quality you would expect in a Kidde manufactured product. The i9040 is powered by a 9V battery, providing continuous protection, even during power outages. This easy to install unit includes a test button to verify the detection electronics are working as intended.
Benefits
The Fire Sentry i9040 battery operated, single station smoke alarm provides an early warning signal to you and your family in the event of a fire hazard. The i9040 operates on a 9V battery power source that provided continuous protection even during a power outage, Installation is easy, no wiring required. This unit is UL Listed and includes a 3 year limited warranty.
This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Battery Operated (9V Battery Included) &ndash Easy installation and provides continuous protection even during power outages.
Test Button &ndash Tests unit&rsquos electronic circuitry, horn and battery function.
Low Battery Indicator &ndash Low battery warning chirp alerts user to change battery.
Discreet Design &ndash Four (4) inch diameter.
Technical Specifications
Model Number
i9040
Power Source
9V Battery (included)
Audio Alarm
85dB at 10ft
Temperature Range
40F to 100F (4°C to 38°C)
Humidity Range
up to 85% relative humidity (RH)
Sensor
Ionization
Size
4&rdquo in diameter x 1.45&rdquo depth
Weight
.5lbs
Interconnects
No
Warranty
3 year limited
$
8.13
Qty:
$
57.92
Qty:
Part #:BRKSC9120B
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
44.25
Qty:
Part #:KIDI4618A
- The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation
&bull Front battery pull tab allows battery activation without removing alarm from mounting bracket.
&bull Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
&bull Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
&bull Large centrally located Test/Hush® alarm control button.
&bull Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features
&bull Easy access front loading battery door.
&bull Battery backup provides protection in case of power failure.
&bull Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user&rsquos guide for complete instructions.
Technical Specifications
Model
i4618
UPC
0-47871-07581-2
Power Source
120VAC (80mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40°F (4.4°C) to 100°F (37.8°C)
Humidity Range
Up to 85% relative humidity (RH)
Size
5.6 in diameter x 1.8 in depth
Weight
.5lbs
Interconnects
Up to 24 Kidde devices
LED
Green, receiving ac power,Red, 4 modes of operation
Warranty
5 year limited
$
12.77
Qty:
Part #:KIDI12010S
- The Kidde i12010S is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with sealed-in lithium battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home.
The i12010S contains a 10-year tamper proof battery that eliminates the need for battery replacement, and ends worry over unauthorized battery removal. The alarm provides continuous protection from smoke and fire, even during power outages. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. The customer can use a simple tool such as a screwdriver to deactivate the unit, stopping the chirp and making it safe for disposal. The end of life signal can be temporarily silenced to allow for replacement at a more convenient time.
Easy Installation
Battery backup automatically activates when the alarm is attached to mounting bracket.
Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
10-year sealed battery substitutes need for routine 9V replacement.
Large centrally located Test/Hush® alarm control button silences nuisance alarms for approximately 9 minutes.
Dust cover protects sensor from contaminates during construction, reducing nuisance alarms.
User-Friendly Features
Red LED indicates alarm mode, Green LED indicates AC power is present.
Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user guide for complete instructions.
End of Life Hush feature allows user to temporarily silence end of life chirp 3 days at a time for a maximum of 30 day life extension.
Technical Specifications
Model
i12010S
Power Source
120VAC (60 Hz, 45mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40F (4.4C) to 100F (37.8C)
Humidity Range
Up to 95% relative humidity (RH), non-condensing
Size
5.5&rdquo in diameter x 1.75&rdquo depth
Weight
.45lbs
Interconnects
Up to 24 Kidde devices
Warranty
10 year limited
$
25.86
Qty:
Part #:KIDP4010DCSCO-W
- The P4010DCSCO-W is a 10-year, sealed battery smoke and carbon monoxide (CO) alarm that features supervised wire-free interconnect capability and provides enhanced intelligibility for users. The voice warning feature accompanies the 85dB tone during an alarm event, and helps reduce confusion with verbal announcements such as &ldquoReplace alarm&rdquo at end of alarm life, and &ldquoHush mode activated&rdquo when a nuisance alarm is silenced. The three color LED ring helps users quickly determine standby, alarm, or error mode of the alarm.
Kidde P4010 Series Alarms contain 10-year tamper proof batteries that eliminate the need for battery replacement, and ends worry over unauthorized removal. Users are further shielded from late night battery chirps by the unit&rsquos Ambient Light Sensing feature, which establishes a day/night cycle and prevents alarm chirping in dark conditions.
Wire-Free Interconnect triggers each connected alarm in the home to sound once smoke is detected, which can provide more time to react. The National Fire Alarm and Signaling Code (NFPA 72) has required smoke alarms in new homes to be interconnected since 1989, which traditionally involves running wiring to each alarm. Older and remodeled homes can now be updated to current standards without having to run any wiring to each alarm through walls and ceilings. Existing networks of interconnected alarms can be expanded with use of a single AC Wire-Free Alarm and additional compatible DC Wire-Free alarms.
Additional benefits and features are available when used in conjunction with the Kidde RemoteLync Bridge, which connects P4010 Wire-Free alarms via your home&rsquos Wi-Fi to your smart device. Additional information such as battery life and sensor health status are available from each assigned room location. Weather alerts, and intruder alerts (when used with the Kidde RemoteLync camera), can be sent to each connected alarm, creating an easy to install fire &ndash security &ndash weather &ndash warning system from one network of devices.
10-Year Sealed Lithium BatteryEliminates late night battery chirp
Voice Notifications
Bug Screen Protects alarm from insect ingression
Flashing LED Status RingAllows easy identification of current state of alarm
Supervised Wire-Free InterconnectProprietary radio signal joins multiple alarms together, so when one alarm sounds they all sound. User is alerted if an alarm loses connection to the network.
Sealed-in Lithium Battery No battery replacement required over the 10 year life of the alarm. Eliminates worry about battery removal or unauthorized deactivation of alarm.
10-Year Limited Warranty
Compatible with RemoteLync Bridge Connect to the Kidde app for additional features and benefits.
End of Unit Life Warning Alerts user the alarm is in need of replacement.
Test&thinsp/&thinspHush® Button Tests alarm circuitry and activates Hush® feature to temporarily silence nuisance alarms for up to 10 minutes. End of Unit Life and Network Error chirps can also be silenced.
Alarm Locate Feature Quickly find initiating alarm by silencing other alarms in the network.
Ambient Light Sensing Establishes Day/Night cycle and prevents chirping during the night until the next Day cycle begins.
Intelligent Sensor Technology Reduces nuisance alarms and offers fast response to real fires.
Easy to Install Simply turn the switch on the back of unit or mount to bracket to activate the alarm. Multiple units can be interconnected with push of one button.
Voice Notifications Unit verbally announces &ldquoFire!&rdquo and other alerts such as &ldquoReplace Alarm,&rdquo which helps the user better understand current status of the unit.
Technical Specifications
Model
P4010DCSCO-W
Power Source
Sealed Lithium Batteries
SmokeSensor
Photoelectric
CoSensor
Electrochemical
Audio Alarm
85dB at 10ft
Temperature Range
40F (4.4C) to 100F (37.8C)
Humidity Range
10% to 95% relative humidity (RH), non-condensing
Size
5.59&rdquo in diameter x 1.91&rdquo depth
Weight
.6lb
Interconnects
Up to 24 Kidde devices
Warranty
10year limited
$
70.97
Qty:
Part #:I12040
- SMOKE ALARM WITH STROBE LIGHT TYPE AC/DC IONIZATION OPERATION TYPE UL APPROVAL 85 DB AT 10 FT HORN TYPE 120 VAC 60 HZ WITH 9 V BATTERY BACKUP VOLTAGE RATING/SOURCE LED INDICATING CONDITION LED/STROBE TYPE 24 INTERCONNECTION(S) SIZE 6.5 INCH W X 13.25 INCH D X 6 INCH H
$
23.04
Qty:
Displaying: 1 - 7 of 7 Matching Items