Electrical Tester
Tools
View:
Active Filters :
- Main Category: Tools
- Type: Electrical Tester Reciproblade
Part #:KLENCVT5KIT
-
Electrical Tester Kit with Dual-Range NCVT and GFCI Receptacle Tester
NCVT5KIT
NCVT-5A provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, as well as AC voltage in security, entertainment, communications, environmental control and irrigation systems
Dual-range testing select 12 to 1000V AC which is perfect for low voltage systems such as doorbells, environmental control or irrigation systems, or select 70 to 1000V AC which is perfect for detecting systems such as electrical mains supply
NCVT-5A delivers simultaneous visual and audible voltage indicators when AC voltage is detected
Audible voltage indicator beeps at a greater frequency the higher the voltage that is sensed, or the closer to the voltage source it is
Bright integrated laser pointer for identifying objects of interest at distance on the jobsite
RT210 detects the most common wiring problems in standard and GFCI receptacles
Works on GFCI outlets and confirms operation of the ground fault protective device
Conditions the RT210 indicates open ground, reverse polarity, open hot, open neutral, hot/ground reversed
Qty:
Part #:KLECL120KIT
-
Clamp Meter Electrical Test Kit
CL120KIT
Measure AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads
Detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord
CAT III 600V, Class 2, Double insulation safety rating
AC Auto-Ranging 400 amp digital clamp meter
Backlit display for clear readings
Includes a case, test leads and batteries
Qty:
Part #:KLECL320
-
HVAC Digital Clamp Meter, AC Auto-Ranging 400 Amp
CL320
Clamp Meter measures AC current and NCVT via clamp and AC/DC voltage, resistance, frequency, DC microamps, capacitance, duty cycle, diode test, and continuity via test-leads, and temperature with thermocouple
Non-contact voltage tester integrated into the clamp jaw
Backlit LCD for ease of viewing in low light
Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands free operation
Measures temperature with a K-Type thermocouple probe
Auto-Range, Data Hold, and Max/Min value
Auto-power off after 10 minutes to conserve battery life
Includes a carrying case, test leads with CAT III/CAT IV safety caps, thermocouple, instructions, and 3 x AAA batteries
Low battery indicator and easily accessible battery compartment
Built to withstand a 6.6-Foot (2 m) drop
CAT III 600V, Class 2, Double insulation safety rating
Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations
Qty:
Part #:KLECL390
-
AC/DC Digital Clamp Meter, Auto-Ranging 400 Amp
CL390
Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands free operation
Non-contact voltage tester integrated into the clamp jaw
High-visibility reverse contrast LCD display for improved view ability in all ambient lighting conditions
Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
Measures AC/DC current and NCVT via clamp and AC/DC voltage, resistance, frequency, DC microamps, capacitance, duty cycle, diode test, and continuity via test-leads, and temperature with thermocouple
Measures temperature with a K-Type thermocouple probe
Max/Min, Rel/Zero and Data Hold capability
Auto-power off after 10 minutes to conserve battery life
Includes a carrying case, test leads with CAT III/CAT IV safety caps, thermocouple, instructions, and 3 x AAA batteries
Low battery indicator and easily accessible battery compartment
Built to withstand a 6.6-Foot (2 m) drop
CAT III 600V, Class 2, Double insulation safety rating
Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations
Qty:
Part #:KLECL220
-
Digital Clamp Meter, AC Auto-Ranging 400 Amp with Temp
CL220
Measures AC current and NCVT via clamp and AC/DC voltage, resistance, and continuity via test-leads, and temperature with thermocouple
Non-contact voltage tester integrated into the clamp jaw
Backlit LCD for ease of viewing in low light
Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands free operation
Measures temperature with a K-Type thermocouple probe
Auto-Range, Hold, Data Hold, and Max value
Auto-power off after 10 minutes to conserve battery life
Includes a carrying case, test leads with CAT III/CAT IV safety caps, thermocouple, instructions, and 3 x AAA batteries
Low battery indicator and easily accessible battery compartment
Built to withstand a 6.6-Foot (2 m) drop
CAT III 600V, Class 2, Double insulation safety rating
Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations
Qty:
Part #:DOTR418B
- STRAIGHT BACK TYPE HEAT TREATED TEMPERED BI-METAL MATERIAL 4 INCH BLADE LENGTH 5/8 INCH BLADE WIDTH 4 BLADE LENGTH - DECIMAL .625 BLADE WIDTH - DECIMAL 4 BLADE LENGTH - FRACTIONAL 5/8 BLADE WIDTH - FRACTIONAL METAL CUT MATERIAL 0.035 INCH BLADE THICKNESS 18 TEETH PER INCH .035 BLADE THICKNESS - DECIMAL DOTTIE. BRAND TOOTH HARDNESS 65 TO 67 RC 5 PER POUCH CUT MATERIAL THICKNESS 18 GAUGE TO 1/8 INCH SHANK SIZE 1/2 INCH BLADE LENGTH - DECIMAL - UOM IN BLADE THICKNESS - DECIMAL - UOM IN BLADE WIDTH - DECIMAL - UOM IN
$
1.86
Qty:
Part #:DOTR424B
- STRAIGHT BACK TYPE HEAT TREATED TEMPERED BI-METAL MATERIAL 4 INCH BLADE LENGTH 5/8 INCH BLADE WIDTH 4 BLADE LENGTH - DECIMAL .625 BLADE WIDTH - DECIMAL 4 BLADE LENGTH - FRACTIONAL 5/8 BLADE WIDTH - FRACTIONAL METAL CUT MATERIAL 0.035 INCH BLADE THICKNESS 24 TEETH PER INCH .035 BLADE THICKNESS - DECIMAL DOTTIE. BRAND TOOTH HARDNESS 65 TO 67 RC 5 PER POUCH CUT MATERIAL THICKNESS 18 GAUGE AND UNDER SHANK SIZE 1/2 INCH BLADE LENGTH - DECIMAL - UOM IN BLADE THICKNESS - DECIMAL - UOM IN BLADE WIDTH - DECIMAL - UOM IN
$
1.86
Qty:
Part #:DOTR610B7
- STRAIGHT BACK TYPE BI-METAL MATERIAL POWDER COATED FINISH 6 INCH BLADE LENGTH 3/4 INCH BLADE WIDTH NON-FERROUS METAL, NON-METAL CUT MATERIAL HEAT TREATED PROCESS 0.035 INCH BLADE THICKNESS 10 TEETH PER INCH TEETH HARDNESS 66 TO 68 RC
$
2.54
Qty:
Part #:DOTR618B7
- STRAIGHT BACK TYPE BI-METAL MATERIAL POWDER COATED FINISH 6 INCH BLADE LENGTH 3/4 INCH BLADE WIDTH METAL CUT MATERIAL HEAT TREATED PROCESS 0.035 INCH BLADE THICKNESS 18 TEETH PER INCH TEETH HARDNESS 66 TO 68 RC
$
2.54
Qty:
Part #:DOTR624B7
- STRAIGHT BACK TYPE BI-METAL MATERIAL POWDER COATED FINISH 6 INCH BLADE LENGTH 3/4 INCH BLADE WIDTH METAL CUT MATERIAL HEAT TREATED PROCESS 0.035 INCH BLADE THICKNESS 24 TEETH PER INCH TEETH HARDNESS 66 TO 68 RC
$
2.54
Qty:
Displaying: 1 - 10 of 10 Matching Items