s.e.s.
Killark
Part #:BRK9120B
- 120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money.
» Single button test/silence » 9V Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Smart Technology - helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » 10-Year Limited Warranty
$
10.73
Qty:
Part #:BRKSC9120B
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
44.25
Qty:
Part #:OLK-3RG
- NEOPRENE MATERIAL UL, CSA APPROVAL SCREW ON COVER TYPE 1 INCH TRADE SIZE SERIES O FORM TYPE HUBBELL[R] BRAND O MODEL
$
9.93
Qty:
Part #:OL-6-RG
- NEOPRENE MATERIAL UL, CSA APPROVAL SCREW ON COVER TYPE 2 INCH TRADE SIZE SERIES O FORM TYPE HUBBELL[R] BRAND O MODEL
$
14.93
Qty:
Part #:KILL370
- SCREW TYPE STAMPED STEEL MATERIAL 5 INCH UL, CSA APPROVAL 1 INCH TRADE SIZE FORM 7 FORM TYPE DURALOY[R] BRAND OVERALL DIMENSION 1-3/4 INCH W X 5/16 INCH H SCREW MATERIAL 316 STAINLESS STEEL USED ON CONDUIT BODY 7 MODEL
$
5.09
Qty:
Part #:OLK-1RG
- NEOPRENE MATERIAL UL, CSA APPROVAL SCREW ON COVER TYPE 1/2 INCH TRADE SIZE SERIES O FORM TYPE HUBBELL[R] BRAND O MODEL
$
8.43
Qty:
Part #:OLK-2RG
- NEOPRENE MATERIAL UL, CSA APPROVAL SCREW ON COVER TYPE 3/4 INCH TRADE SIZE SERIES O FORM TYPE HUBBELL[R] BRAND O MODEL
$
0.66
Qty:
Part #:OL-10
- SCREW TYPE COPPER FREE ALUMINUM MATERIAL 3 15/16 INCH UL, CSA APPROVAL 1/2 INCH TRADE SIZE KILLARK[R] BRAND SCREW MATERIAL STAINLESS STEEL WIDTH 1 3/8 INCH HEIGHT 3/8 INCH O MODEL
$
5.49
Qty:
Part #:OL-20
- SCREW TYPE COPPER FREE ALUMINUM MATERIAL 4 5/8 INCH UL, CSA APPROVAL 3/4 INCH TRADE SIZE KILLARK[R] BRAND SCREW MATERIAL STAINLESS STEEL WIDTH 1 5/8 INCH HEIGHT 3/8 INCH O MODEL
$
8.43
Qty:
Part #:OL-450
- SCREW TYPE COPPER FREE ALUMINUM MATERIAL 7 3/16 INCH UL, CSA APPROVAL 1 1/4 INCH TRADE SIZE KILLARK[R] BRAND SCREW MATERIAL STAINLESS STEEL WIDTH 2 5/8 INCH HEIGHT 5/8 INCH O MODEL
$
11.67
Qty:
Part #:OL-60
- SCREW TYPE COPPER FREE ALUMINUM MATERIAL 9 1/2 INCH UL, CSA APPROVAL 2 INCH TRADE SIZE KILLARK[R] BRAND SCREW MATERIAL STAINLESS STEEL WIDTH 3 1/8 INCH HEIGHT 5/8 INCH O MODEL
$
21.89
Qty:
Part #:ENY-2M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 3/4 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-9/32 INCH TURNING RADIUS HUBBELL[R] BRAND ENY MODEL
$
29.33
Qty:
Part #:KILL270
- SCREW TYPE STAMPED STEEL MATERIAL 4-1/4 INCH UL, CSA APPROVAL 3/4 INCH TRADE SIZE DURALOY[R] BRAND OVERALL DIMENSION 1-1/2 INCH W X 5/16 INCH H SCREW MATERIAL 316 STAINLESS STEEL USED ON CONDUIT BODY 7 MODEL
$
3.70
Qty:
Part #:KILL570
- SCREW TYPE STAMPED STEEL MATERIAL 6 INCH UL, CSA APPROVAL 1-1/2 INCH TRADE SIZE DURALOY[R] BRAND OVERALL DIMENSION 2-7/16 INCH W X 5/16 INCH H SCREW MATERIAL 316 STAINLESS STEEL USED ON CONDUIT BODY 7 MODEL
$
6.17
Qty:
Part #:KLRK870
- SCREW TYPE GALVANIZED STAMPED STEEL MATERIAL 9 INCH UL, CSA APPROVAL 2 1/2 INCH TRADE SIZE KILLARK[R] BRAND SCREW MATERIAL 316 STAINLESS STEEL WIDTH 4 1/4 INCH HEIGHT 9/16 INCH
$
17.20
Qty:
Part #:KILLUNY1
- MALE/FEMALE TYPE ZINC ELECTROPLATED STEEL MATERIAL 2-3/16 INCH UL 886, CSA C22.2 APPROVAL 1-1/2 INCH DIAMETER 1/2 INCH TRADE SIZE USED ON RIGID/IMC CONDUIT UNY MODEL
$
18.81
Qty:
Part #:KILLUNY2
- MALE/FEMALE TYPE ZINC ELECTROPLATED STEEL MATERIAL 2-3/8 INCH UL 886, CSA C22.2 APPROVAL 1-3/4 INCH DIAMETER 3/4 INCH TRADE SIZE USED ON RIGID/IMC CONDUIT UNY MODEL
$
36.96
Qty:
Part #:KLRKUNF2
- FEMALE/FEMALE TYPE ZINC ELECTROPLATED STEEL MATERIAL 1-15/16 INCH UL 886, CSA C22.2 APPROVAL 1-3/4 INCH DIAMETER 3/4 INCH TRADE SIZE .75 TRADE SIZE IN INCH HUBBELL[R] BRAND UNF MODEL
$
21.93
Qty:
Part #:KILLUNF3
- FEMALE/FEMALE TYPE ZINC ELECTROPLATED STEEL MATERIAL 2-7/16 INCH UL 886, CSA C22.2 APPROVAL 2 INCH DIAMETER 1 INCH TRADE SIZE USED ON RIGID/IMC CONDUIT UNF MODEL
$
41.72
Qty:
Part #:KILLRE21S
- THREADED, SLIP TYPE GLOSSY GRAY ZINC PLATED STEEL MATERIAL 13/16 INCH 1/2 INCH SMALL END TRADE SIZE 3/4 INCH LARGE END TRADE SIZE UL 886, CSA C22.2 APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G ENCLOSURE CONSTRUCTIONAL FEATURE EXPLOSIONPROOF APPLICATION HAZARDOUS LOCATION USED ON RIGID/IMC CONDUIT SYSTEM APPLICABLE STANDARD ATEX, IECEX RE MODEL
$
4.00
Qty:
Part #:KILLRE32S
- ZINC PLATED STEEL MATERIAL 13/16 INCH 3/4 INCH SMALL END TRADE SIZE 1 INCH LARGE END TRADE SIZE UL 886, CSA C22.2 APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G ENCLOSURE RE MODEL
$
6.11
Qty:
Part #:KILLLB27
- ELECTROSTATICALLY APPLIED POWDER COATED OVER ELECTRO ZINC AND CHROMATE SEALANT CLASS 30 GRAY IRON ALLOY MATERIAL 5-3/8 INCH L X 2-1/2 INCH W X 1-3/4 INCH H SIZE RIGID CONDUIT/IMC USED ON 3/4 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LB CONFIGURATION 2 HUB(S) UL, CSA APPROVAL STAINLESS STEEL COVER TYPE 90 DEG HUB LOCATION FORM 7 FORM TYPE BACK ACCESS OPENING DURALOY[R] BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-C-586D/A-A 50563 7 MODEL
$
16.60
Qty:
Part #:KILLLB37
- ELECTROSTATICALLY APPLIED POWDER COATED OVER ELECTRO ZINC AND CHROMATE SEALANT CLASS 30 GRAY IRON ALLOY MATERIAL 6-5/16 INCH L X 3 INCH W X 1-15/16 INCH H SIZE RIGID CONDUIT/IMC USED ON 1 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LB CONFIGURATION 2 HUB(S) UL, CSA APPROVAL STAINLESS STEEL COVER TYPE 90 DEG HUB LOCATION FORM 7 FORM TYPE BACK ACCESS OPENING DURALOY[R] BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-C-586D/A-A 50563 7 MODEL
$
18.28
Qty:
Part #:KILLLB47
- ELECTROSTATICALLY APPLIED POWDER COATED OVER ELECTRO ZINC AND CHROMATE SEALANT CLASS 30 GRAY IRON ALLOY MATERIAL 6-13/16 INCH L X 3-1/2 INCH W X 2-5/16 INCH H SIZE RIGID CONDUIT/IMC USED ON 1-1/4 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LB CONFIGURATION 2 HUB(S) UL, CSA APPROVAL STAINLESS STEEL COVER TYPE 90 DEG HUB LOCATION FORM 7 FORM TYPE BACK ACCESS OPENING DURALOY[R] BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-C-586D/A-A 50563 7 MODEL
$
29.28
Qty:
Displaying: 1 - 24 of 58 Matching Items